PDA

View Full Version : Do you own a PM9, CM9, Both



mightymouse
01-25-2012, 02:25 PM
Seems the CM9s are selling like hotcakes. I'm curious how the number of CM9 owners stacks up to the PM crowd.

bapple
01-25-2012, 02:40 PM
I got mine from Bud's Gun Shop at 398. I saw them for a while on the front page of "Hot Sellers" and they had lowered the price to 377. They have a ton of reviews on there so I imagine they are selling like crazy. And now that the CM40 is out, I bet they will sell just as well.

Thunder71
01-25-2012, 02:42 PM
Mk9
pm9

LonghornFan69
01-25-2012, 02:49 PM
Picked up my CM9 at the gun show on Sunday for $390, checked the local gunshop today when I went to buy a spare magazine and the CM9s were selling for $478, I think I got a good deal.

Bill K
01-25-2012, 02:56 PM
Hard to say for certain but I probably would have bought the CM9 instead of the PM9 were it available at time of purchase.

Personally ifin I were interested in the PM45 I'd wait for the CM45 (and wait for the early adapters to post their range reports).

ltxi
01-25-2012, 03:47 PM
PM9/MK9/K9

CM9 wasn't available when I bought my PM9, either. I'd still opt for the PM9 today, however, because of the availability of the black diamond slide finish and night sights.

That is assuming I'd still buy the Kahr. The Sig P938 might have changed my answer.

rjt123
01-25-2012, 03:51 PM
Pm9/pm45

Doc Holliday
01-25-2012, 04:27 PM
CM9 from CheaperThanDirt for $350.00. Love it.

JFootin
01-25-2012, 04:53 PM
The Sig P938 might have changed my answer.

I understand that the trigger pull on the 938 is about 8.5 lb, and you would have to pay a certified Sig armorer a lot of money to improve on it.

ltxi
01-25-2012, 06:00 PM
I understand that the trigger pull on the 938 is about 8.5 lb, and you would have to pay a certified Sig armorer a lot of money to improve on it.


No, actually I could/will simply tune it myself. As I did my P238, my Mustang before that, and most all my 1911s.

If anyone feels a clean 8.5# sa break is an issue, and many folk won't have a problem with that, any decent gunsmith should be able to get it down to 6# without breaking a sweat.

Hell, my carry J-frames run 8#+/- DA and they aren't a problem.

pocket pistol
01-25-2012, 06:43 PM
CM9 owner here... And lovin' it.

center_mass
01-25-2012, 06:43 PM
Just got CM9 for myself and the wife to share, but thinking seriously about the CW9 to add....cheaper than dirt has it for $328...can't pass that up!

kahrnut1
01-25-2012, 07:05 PM
just bought another pm9 3wks ago. lgs did not have cm9 but did buy cw9

alseg
01-25-2012, 07:05 PM
CM9.
A few coughs with PMC ammo on start-up (slide not locking back after last rd.), but after a new slide spring and running 250 rds. of decent ammo (rem express, AE), it now eats everything.
Trijicon nightsights and a CT added....target remains spot on.
Cost? Well, I traded a KelTec CF9 for the CM9, and since the local dealer sold me both....and knew I was miffed about the KT, my deal was, shall I say, not representative.

jdataco
01-25-2012, 07:08 PM
Both are great pistols! I went looking for a CM9 and found a barely used PM9 with 3 mags for the price of the CM9.

rkirk
01-25-2012, 07:56 PM
I have a CW9 and a CM9. Kahr pistols are great! I like both and carry both!

-- Richard

Ubaldo99
01-25-2012, 10:44 PM
Count me amongst the nameless hordes of satisfied CM9 owners! Looks like the rabble (CM9'ers) may now outnumber the royalty (PM9'ers). :D

O'Dell
01-26-2012, 12:15 AM
Count me amongst the nameless hordes of satisfied CM9 owners! Looks like the rabble (CM9'ers) may now outnumber the royalty (PM9'ers). :D

I guess you can count me among the Royalty. :D

wyntrout
01-26-2012, 09:50 AM
New K9093N March 1998(re-lamped August 2010) and LNIB PM9094N Jan. 2010.

Wynn:)

kahrnewbie
01-26-2012, 10:25 AM
Just purchased a PM9. I love it.

Hognutz
01-26-2012, 10:25 AM
PM9 here. I wanted the black slide and night sights. I really like it..

jocko
01-26-2012, 10:41 AM
In my little mind, I am ging to say the cm9 will be at least even in ownership if not a tad more. We have to understand the PM9 has beenout there a long time 3X longer than the cm9, so one would think the pM9 would dominate. But to me this also shows the total acceptance and reliability of the cm9 to, as being just as good as the PM9 only big bucks less. Its a fightin tool, not a aston-Martin. shoot the fokker li,e u jstole it, cause u can't hurt the cm9.

alan1028
01-26-2012, 12:52 PM
CM9 for me. I believe it to be the smallest and most reliable for the money.


Sent from my iPhone using Tapatalk

joe d
01-26-2012, 02:31 PM
CM9 and CW45...Love em' both...

crazymailman
01-26-2012, 02:52 PM
PM9 here. I considered the CM, but wanted the black slide. Plus at the time, I was too impatient to wait on finding the CM.

kahrcrazy13
01-26-2012, 03:11 PM
which is a better model the cm9 or the pm 9 ? i just got a tp45 and im now in love with kahr looking to get a 9 mm but having trouble deciding pm or cm! can someone tell me which is better and why ?
thank you
paul a. gaglione

kpm9
01-26-2012, 03:38 PM
Had a PM9 and just yesterday received a new CM9 from buds. CM9 is just as accurate, very tight and was reliable through 200 rounds today of WWB.

I sold the P9/PM9 hoping for good things from the Beretta Nano. That didn't happen and I realized how good the Kahr is compared to it. Even the CM 9 is easier to shoot and more accurate.

Fortunately I still had several PM9 mags so the one mag that comes with the CM9 wasn't an issue.

I actually like the more angular lines of the CM9 and as long as it's reliable like the PM9 I'm happy. I will be sending it to Kahr for night sights also.

jocko
01-26-2012, 04:09 PM
humm from reading ur post, I am assumig ur PM9 was the old style blunt noxe version. IMO the bestof any kahr made yet, I am not fond of "THE ANGULAR LINES"on the new kahrs,. IMO they just made the smallest 9mm alittle bigger and heavier to really no gain, IMO>

JFootin
01-26-2012, 04:40 PM
I actually like the more angular lines of the CM9 ...

Me, too! :D

http://i1230.photobucket.com/albums/ee486/John_England/My%20Custom%20CM9/KahrCM9PolishedLSwMagandBullets.jpg

jocko
01-26-2012, 05:19 PM
yes I know I am a mionority in my thoghts on this, but u now what, who gives a rats ass!!!

jocko
01-26-2012, 05:20 PM
yes I know I am a mionority in my thoghts on this, but u now what, who gives a rats ass!!! Heh footin are u talking aboput the angular lines in the grain on the table??????

les strat
01-26-2012, 05:50 PM
CM9 here.

growler17
01-27-2012, 07:33 AM
Cm9 owner and won't look back!!

DJK11
01-27-2012, 04:33 PM
PM9 Chevrolet or Cadillac

JFootin
01-27-2012, 05:39 PM
PM9 Chevrolet or Cadillac

Whaaat? :001_huh:

whitemule
01-27-2012, 05:57 PM
I got mine from Bud's Gun Shop at 398. I saw them for a while on the front page of "Hot Sellers" and they had lowered the price to 377. They have a ton of reviews on there so I imagine they are selling like crazy. And now that the CM40 is out, I bet they will sell just as well.
CM40 is out? How long? Anyone shot one? Oh yeah, CM9 and CW40....

jocko
01-27-2012, 05:58 PM
wow a cm9 for 377 unbelievable...

whitemule
01-27-2012, 06:01 PM
I paid $430 for mine, about 3 months ago...a bargain at twice the price!

Ricky59
01-28-2012, 06:03 AM
PM9 .... experienced black with night sights and 3 mags for 500..
PM9094N.

nyc71
01-28-2012, 03:21 PM
I got a CM9 from Budsgunshop too for $377, I went back to check for price & it's at $399!


"They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety"- Benjamin Franklin