CW9 problem

[emt1231]

I had came back from shooting at the range the other day and while cleaning I found little dent in the "pick up ramp". I am not really sure what to call it. Should I be worry about this causing jams?
http://img.tapatalk.com/18bc222a-6497-e825.jpg
Sorry for the bad picture but it is at the top of the ramp.

[sas PM9]

I had came back from shooting at the range the other day and while cleaning I found little dent in the "pick up ramp". I am not really sure what to call it. Should I be worry about this causing jams?
http://img.tapatalk.com/18bc222a-6497-e825.jpg
Sorry for the bad picture but it is at the top of the ramp.


EMT:

That dimple was put there by the factory. I believe that it signifies a design change.

HTH

-steve

[MW surveyor]

If it's the dimple you are talking about..........what he said^^^^^

[cjm2022]

how many rounds do you have through it? mine has about 600 and has some small marks on the inside of the slide. looks to me like there isn't a lot to worry about here as long as it still functions. if it does as jocko would say "shoot it like you stole it"

[emt1231]

Thank you for the fast reply but that isn't the dent I was trying to picture. Here is a better picture I attempted to take. It's on the ramp itself above the strikers.
http://img.tapatalk.com/18bc222a-6be2-17df.jpg

[emt1231]

I have 400 rounds through it and so far its been shooting perfectly. And I am just worried that this just appeared and don't want it becoming larger

[MW surveyor]

Ok. Beats me. Here come the words that are the hardest for men to say......

I don't know. Some one may be along shortly that might know.


Oh and by the way. WELCOME TO THE FORUM.

[Tslepebull]

It looks like a manufacturing ding and should not be a problem. If it really bothers you, the ramp can be polished with some 800 grit wet dry paper. I do this to all my autoloaders as part of the "fluff and buff" operation before I shoot them. I find that it reduces the need for a break in period.

[CJB]

Zero issues there!

New gun is something special... I understand the worry.
It probably didn't just get there, but was just noticed. Could be factory firing, lube, whatever... even the lighting conditions, obscured that little dingus. Its a non issue.
The big dimple is a hardness test. Reading up (quick edit), or at least I THOUGHT it was a hardness test... maybe I be wrongo!

[tarheelcm9]

I can't see anything...and as long as there isn't a bur that would catch anything, then I wouldn't worry about it.

[emt1231]

Thanks for the replies and putting some worries to rest

[jocko]

It's OK, probalby left that way from the factory. the pickup bar merely moves trhe next round into the chamber. That dent has nothing todo kwith anything. Just shoot it like u stole it kand forget about it. Only thing that dent might catcvh is ur attention and nothing else.