Video review of a PJ Holster

[nyc71]

Has anyone seen a video of a PJ holster review for a PM/CM9? I've done a general search without results.
Thank you

[gb6491]

While it's done with another make of pistol, i found this video very informative in regards to PJ holsters:
http://www.youtube.com/watch?v=xDdd4k5rQow
Regards,
Greg

[340pd]

I have no video but Yesterday I got tired of fumbling with snaps and ordered my third PJ holster. This time for my 340PD snubbie. These things are the best "grab and go" holster I have ever used bar none. My preference is the over the belt clip on a good gunbelt.
http://i163.photobucket.com/albums/t320/gnystrom_photos/PJholsterKahr.jpg

[bonjorno2]

what do you want to know? They are great and add nothing really to the pistol... if you want to see what the holster looks like check out glocktalk.com also. If you take a picture of how you want to carry the gun he will make it fit like you want it.

[Gadgetnut259]

I just ordered one for my CM9. I ordered a right-side IWB with the clip that snaps over the belt. I also requested a 20 degree cant (I think his standard cant is 15 degrees). He emailed me right away and said he is currently running 2 to 3 weeks on shipping. Can't wait to get it!

[nyc71]

My wife ordered me one three days ago but I haven't receive any notification.
gb6491 thanks for the video.
bonjorno2 you mentioned I should look at glocktalk, under what section?

[JFootin]

My wife ordered me one three days ago but I haven't receive any notification.
gb6491 thanks for the video.
bonjorno2 you mentioned I should look at glocktalk, under what section?

You won't get any notification, just the holster in the mail.

[jokester]

I have a PJ holster for my CM9. It is IWB with a slight cant. It wont win any beauty contest but I wont carry with any other holster !!! Its that comfortable and you will not even know its there. Just my opinion:cool:

[nyc71]

I contacted PJ & he was 3 weeks behind.

[Gadgetnut259]

I contacted PJ & he was 3 weeks behind.
That sounds about right. I ordered one from him a little over two weeks ago and I just emailed him yesterday to check on it. He said mine should be up on his schedule soon and he estimated it would mail out by Monday of next week. That would make it exactly 3 weeks from order to ship. He's in PA and so am I, so I figure a few days in the mail.

[340pd]

Paul will send you an e-mail when it shipped. My latest is on the way. It took about two weeks. Nice to see all the holster and belt makers are backlogged. American ingenuity produces a great variety of products that we all benefit from.

[Mechatricity]

These look like great holsters, i don't know how you can get much more concealed than that!

[JFootin]

These look like great holsters, i don't know how you can get much more concealed than that!

...or more comfortable. My CM9 rides so comfortably in one at 8:00 (lefty) all day long that I cannot tell it is there until I reach back there and touch the gun! I can say with complete confidence that you simply cannot find a better carry solution for the PM/CM series guns.

[white cloud]

These look like great holsters, i don't know how you can get much more concealed than that!

they are great. easy on and off yet a great draw. the magazine carrier is really nice. pj's stuff has everything you need and nothing else.

no worries about sweat either. here in s.c. it gets really hot and sweat is a big deal. leather iwb holsters just don't well if you carry a lot.

[HalfCocked]

OK, convinced me. I ordered one. Now the wait begins.....:tongue:

[itsthelaw]

Has anyone compared to a Foxx holster. Foxx Trap versions are a bit less expensive and have an adjustable clip. Seems like it would be nice to adjust your cant as needed and cannot imagine that the thickness is substantial. I have a PJ and like it, but don't love it like others do.

[nyc71]

The package came in yesterday but I was sent the wrong holster. I ordered the CTC version but received the standard. I contacted Paul he said I was getting the replacement ship today plus a pre-paid envelop for the other one.

[nyc71]

Here it
http://img.tapatalk.com/d/12/10/30/agusu2yh.jpg

[Chogers]

Here it
http://img.tapatalk.com/d/12/10/30/agusu2yh.jpg

Im jealous! I will order mine tomorrow for my PM9 with CT. Can I ask what clip you went with and what degree cant?

[nyc71]

Straight for AIWB.

[Gadgetnut259]

Mine came in last week. IWB with over-the-belt clip and 20 degree cant. I am very happy with it. Very secure and comfortable, and the gun just disappears at the 4:00 position even under a light T-shirt. Well worth the price and the wait (3 days shy of a month from order to receipt).

[JFootin]

You guys keep talking about a 20° cant. I am going to have to try that. I just need to figure out how to heat the kydex safely in order to change the cant (I don't have a heat gun).

[nyc71]

Im jealous! I will order mine tomorrow for my PM9 with CT. Can I ask what clip you went with and what degree cant?

Back of the holster
http://img.tapatalk.com/d/12/10/31/su5e8aba.jpg

[Chogers]

You guys keep talking about a 20° cant. I am going to have to try that. I just need to figure out how to heat the kydex safely in order to change the cant (I don't have a heat gun).

It sounds like I may have to order mine with a 20 degree cant as well. I used a blow dryer for my crossbreed. Maybe try that?

[Gadgetnut259]

For me personally, I chose the 20 degree cant because it really hides the gun. Printing is at an absolute minimum and the draw angle is quite comfortable.

[JFootin]

It sounds like I may have to order mine with a 20 degree cant as well. I used a blow dryer for my crossbreed. Maybe try that?

I didn't think a blow dryer would get it hot enough. You got yours soft enough to bend?

[Chogers]

I didn't think a blow dryer would get it hot enough. You got yours soft enough to bend?


Crossbreed tells you to do that on their kydex to add retention. All I did was heated it enough to dent in the trigger guard part. If you do it on your loop make sure you wrap the rest of the holster in a towel and use gloves. I am not a professional so dont sue me. ;)

[HalfCocked]

I didn't think a blow dryer would get it hot enough. You got yours soft enough to bend?

this ehow doesn't mention ovens but I wonder about heating it in the oven. 300 degrees max, I would start with a cold oven and keep checking until temp reached 300. It appears to have a working temp in the low 300 and should not get into the 400 temps ever....

http://www.ehow.com/how_7901810_methods-molding-kydex.html

other wise I am sure Paul will make you another holster :19:

[JFootin]

this ehow doesn't mention ovens but I wonder about heating it in the oven. 300 degrees max, I would start with a cold oven and keep checking until temp reached 300. It appears to have a working temp in the low 300 and should not get into the 400 temps ever....

http://www.ehow.com/how_7901810_methods-molding-kydex.html

other wise I am sure Paul will make you another holster :19:

Well, Paul can heat it and rebend it. But he is a busy man! From what I have read, there is a temperature that is right and there is a temperature a little higher where the kydex is quickly destroyed. No danger of that with a hair dryer. I wouldn't want to put it in the oven because it might change shape in other places. I would want to concentrate the heat on the top edge where the clip bends over. I think I can do it by holding it near a burner on my electric stove and keep checking it until it is soft enough to rebend.