Will KAHR fit a 1911 holster

[8th SPS USAF]

I heard that KAHR's will work in a 1911 holster. I do not own either
1911 or 1911 holster. I would guess Officers/Com?
Thank you,
8th

[1sleekMK40]

I understand some will work, I think the ones generally made for 1911's not necessarily the ones for a specific type. I hope you understand what I'm trying to say.

Example:
Tuck-able Holster - Leather - Ace Case (http://acecase.com/tuck-able-holster-leather.html)

Depending on size of 1911 one of these could work, I know J works well with Kahr.....

[vincent wood]

Most of the leather holsters will fit, but not the Kydex style, because the Kahr trigger guards are much thicker than the 1911 styles.
Vinnie:D

[DarrellR]

In my experience I've found what Vinnie said to be true. Some of the simple 1911 leather belt slides work pretty good.

[8th SPS USAF]

Thank you all. I may look around at the up coming gun shows and see if any

fit. What does J means? J frame SW?

8th

[LaVere]

I heard that KAHR's will work in a 1911 holster. I do not own either
1911 or 1911 holster. I would guess Officers/Com?
Thank you,
8th

I have a Kahr k-40 and have used it in a Milt Sparks Summer special

http://farm3.static.flickr.com/2584/3912315234_2c61f0a649_m.jpg

The one on the Right
It leaves about 1 to 1 1/2 " empty at the bottom.

If I were to buy one just for the Kahr I would get this:

http://farm3.static.flickr.com/2486/3911540211_0949c59e0b_m.jpg
I have one for my sig and it is great very confortable. Big Bucks and long wait.

This my current carry from Kahr.
http://farm3.static.flickr.com/2427/3896744452_e0f6ab3056_m.jpg

[pokey074]

A long time ago I had a K40. It fit perfectly in a Kramer Vertical Belt Scabbard. I currently carry a PM9 as a backup in a Fobus ankle holster made for the 1911.

[wagon]

I was in Sportsman warehouse the other day, they have a Ross Leather slide stamped for 1911 on sale for just $39 (with suede lining), out of curiosity I tried it with the PM9 I had with me, it fits but has a very slight wiggle. I pass.

[MattTheKnife]

I have a Galco Yaqui slide for a 1911 that also fits my Kahrs. The adjustment screws only need to be tightened a little. I have not tried an IWB holster. I would always recomend an IWB designed for a specific firearm.

[ltxi]

Well, duh.....it just occured to me that I ought to check this out. Found two old 1911 Dillon belt slide holsters in "the holster box" that fit my Kahrs perfectly! The Galcos I came across don't though.

[OK45]

My CW9 fits a Don Hume 1911 slide perfectly. 1911 won't fit in the Hume clip on IWB though.

[Raul duke]

My cw 40 rides in a 3 inch colt commander iwb leather holster. So yes for me it works.