cw9 loader

[jake677]

new cw9 with 150 rds and works flawlessly. great gun, easy to shoot however my old hands are having a problem with the magazine. any suggestions on a magazine loader that would save my thumbs?

[O'Dell]

I use the UpLula for all my pistols, 380 to 45.

[megamanfan]

Get a UpLula. I can load 3 17round mags in 5 mins or less

[TheTman]

UpLula is definately the way to go. I have arthritic hands too, and it sure helps getting the last couple of rounds in the mag.

[Tinman507]

+1 on the UpLula. A thumbsaver for sure.

[kuchman]

:86:
I agree as well, the Upula loader is one great item. 45, 9mm, 40, it does them. It takes a few mags to get used to it, but it is worth it.

[RWillieK]

There is another loader out there as well that isn't as expensive, and I think it works equally as well....

ADCO Super Thumb

http://www.cheaperthandirt.com/product/3-1015259

[yqtszhj]

UpLula is the best. My wife likes it a While lot. Plus if you ever get any double stack magazines it works well for them too.

The Israelis cant be wrong

[LorenzoB]

Uplula is awesome.
Amazon has it on sale...
http://www.amazon.com/gp/aw/d/B001HBHNHE/ref=mp_s_a_1?qid=1355889063&sr=8-1&pi=SL75

Still 5 out of 5 stars after more than 1000 reviews.

[jake677]

Thanks for the input. Got the uplula and it works great with both cw9 and glock19. In fact better than the loader that came with the glock.

[BucketBack]

Thanks for the input. Got the uplula and it works great with both cw9 and glock19. In fact better than the loader that came with the glock.
Except I paid $2.99 for my Glock loader and about 10 times more for the Uplula

[cnj]

There is another loader out there as well that isn't as expensive, and I think it works equally as well....

ADCO Super Thumb

http://www.cheaperthandirt.com/product/3-1015259

Do you have a CW9? Which model number ADCO are you using?

[newCW45guy]

Thanks for the input. Got the uplula and it works great with both cw9 and glock19. In fact better than the loader that came with the glock.

Just remember to manually load the first round as the loader's arm is harder than the plastic follower and can scar it.

[68blackbird]

I like to tinker with stuff. Picked up a Glock loader for $5, had some old pieces of phenolic, cut and glued them in...not pretty, but it works.

https://lh4.googleusercontent.com/-FuZZjvtRCT0/URKweq0sySI/AAAAAAAACF8/6c7r9p5bIdI/s568/2013-02-06_13-06-18_564.jpg



https://lh6.googleusercontent.com/-Zt3H5nu42d8/URKwcbpnBFI/AAAAAAAACF0/Qw5qOMWCeYY/s568/2013-02-06_13-07-04_472.jpg

[Short Bus]

Do you have a CW9? Which model number ADCO are you using?
I have a P9 and use a ADCO ST3

[luvall]

UpLula

[warbird1]

You get what you pay for. UpLula = quality. Pay good money for a gun and then go cheap on a speed loader.....why?

[68blackbird]

You get what you pay for. UpLula = quality. Pay good money for a gun and then go cheap on a speed loader.....why?

Because it does exactly what the other does. I like to tinker and make my own stuff just because....I can.

[Short Bus]

You get what you pay for. UpLula = quality. Pay good money for a gun and then go cheap on a speed loader.....why?
Because with the gun I'm paying for something that could save my life and my family's lives, with the loader I'm just making it a little easier at the range + the price difference = 50 rounds to practice with :33:

[downtownv]

Just wondering, what lead to the decision?:yo:

[bulletnose]

I like to tinker with stuff. Picked up a Glock loader for $5, had some old pieces of phenolic, cut and glued them in...not pretty, but it works.

https://lh4.googleusercontent.com/-FuZZjvtRCT0/URKweq0sySI/AAAAAAAACF8/6c7r9p5bIdI/s568/2013-02-06_13-06-18_564.jpg



https://lh6.googleusercontent.com/-Zt3H5nu42d8/URKwcbpnBFI/AAAAAAAACF0/Qw5qOMWCeYY/s568/2013-02-06_13-07-04_472.jpg

This was one heck of a great idea. I had an old Glock loader in my stuff drawer and I cut and shaped two pieces of plastic and now I have the best mag loader for my CW9 and P9. Thanks for the idea !! :amflag:

p.s.~~ didn't cost me nuthin but a little time and effort!

[rvanpelt]

This loader is made from a pill bottle lid from Walgreens for my Ruger SR22. It didn't cost me anything either. :) I call it my WALLULU
:Amflag2:
Thanks,
Rod van Pelt
http://i931.photobucket.com/albums/ad154/vanpeltrk/0226131023.jpg
http://i931.photobucket.com/albums/ad154/vanpeltrk/0226131023a.jpg

[ParrotHead]

Is that just to hold the magazine upright? My SR22 mags have the
thumb loader built into them.

[rvanpelt]

Is that just to hold the magazine upright? My SR22 mags have the
thumb loader built into them.
No, it takes the pressure off of the one thumb nail and makes it easier to load the mag. Some mags don't have much to hold onto while loading. Try making one. You'll only be out about 5 minutes.:)
Rod:Amflag2:

[ParrotHead]

Oh, OK. I don't really have any problems loading mine.

[rvanpelt]

I love the uplulu for my Kahr CW9 :) but won't work on my Glock 36 .45 cal.
Rod van Pelt:Amflag2:

[downtownv]

I love the uplulu for my Kahr CW9 :) but won't work on my Glock 36 .45 cal.
Rod van Pelt:Amflag2:
Get rid of the Glock! Problem Solved!
I buy useless Glocks for $50 any condition.....

[rvanpelt]

double post sorry.

[rvanpelt]

Get rid of the Glock! Problem Solved!
I buy useless Glocks for $50 any condition.....
I'll quad drupple your money.:) LOL Why would you buy anything worthless at any price?? MY GLOCKS GO BANG!! YOU NEED ONE TOO.
I'll never part with my Glocks, no problems, no regrets...EVER!!
Rod:Amflag2:
__________________
:Amflag2:KAHR CW9, GLOCK 36, GLOCK 26,
RUGER SR22, RUGER Mini 14, HENRY .22, REMINGTON 597 .22, RMINGTON MODEL 4 .270, REMINGTON 1100,

[bassgunner]

i have the uplula in the 22 size and the 9-45 size. it was a great investment.

[jzorn]

upllala all the way. I bought the larger on so I can also load my Glock mags

[rvanpelt]

upllala all the way. I bought the larger on so I can also load my Glock mags
Just so you know upllula won't work on a GLOCK 36 .45 cal for some reason. Love it for my G26, Kahr CW9 and S&W 40VE.
Rod van Pelt:Amflag2:

[BucketBack]

Just so you know upllula won't work on a GLOCK 36 .45 cal for some reason. Love it for my G26, Kahr CW9 and S&W 40VE.
Rod van Pelt:Amflag2:
Must be the girth;)

[rvanpelt]

Must be the girth;)

Could be, BucketBack. Girth is about the same as my G26 but is a tad deeper. 36 is a single stack my 26 9mm is a double stack. The problem is after pushing a round into mag the part that pushes down the round won't spring out from under the next round. Maybe a little more room in the and back of the mag might help. Oh well, loading the .45 by hand is easier than the 9mm Glock and Kahr and S&W 40.
Rod van Pelt