PDA

View Full Version : Can someone direct me to mag follower mod



Sirvive
12-29-2012, 08:31 PM
I can't seem to find a good Sticky on the magazine mod/sanding the follower a bit because of the little bind or a user to look up with mod instructions..

Appreciate the help guys.

muggsy
12-29-2012, 09:28 PM
Sanding the follower was a mod. to assist chambering a round using the slingshot method. It isn't necessary in most cases. Once your gun is broken in you should be able load the chamber by the slingshot method without any problem if you use the correct technique. You might want to check to see if the magazine spring is correctly installed if the follower is hanging up. You can also check for any flashing on the follower at the same time. Flashing can be trimmed with a utility knife or sanded.

jocko
12-29-2012, 09:35 PM
I can't seem to find a good Sticky on the magazine mod/sanding the follower a bit because of the little bind or a user to look up with mod instructions..

Appreciate the help guys.

PM sent.

Tilos
12-29-2012, 11:29 PM
Vid:
http://www.youtube.com/watch?v=y12XanmHYa4

http://kahrtalk.com/showthread.php?t=9729

Threads:

http://kahrtalk.com/showthread.php?t=14747&highlight=mag+follower

Sirvive
12-30-2012, 12:06 AM
PM sent.


Jocko you da man! Thanks!