Does anyone with a pm9/cm9 have a n82 pro?

[aKahrt_and_p2KT]

Looking for a picture of a kahr in a n82 pro holster to guage what the ride height looks like. It's a bit pricey for me to jump in at this one but its hard to ignore all the good reviews online about that company.

Looking for pics or experienced opinions here.
Thanks!

[phil413tx]

Thanks for the thread. I have been wondering the same thing. However, I have an mk9 but I figured it will be similar to the pm9 in overall size and dimensions.

[Badwolf75]

No pic, but I run a CM9 in an N82 Tactical Professional as my EDC. The ride height is pretty low. The grip will sit right above your belt line.

If you have any questions, just ask.

Sent from my ADR6425LVW using Tapatalk 2

[cloud]

sorry don't have one for the cm9 .Have one for the xds .Will take a pic of that if it helps. Great company they are a couple miles down the road from me.

[aKahrt_and_p2KT]

For anyone using it, did it replace a holster you were previously using, if so what was it? Does the pad mold to your body or stay flat like a plate or piece of cardboard?

I'm very close to ordering.

[Badwolf75]

It replaced a Crossbreed style holster. Far more comfortable. The retention the holster offered was another plus for me. The only complaint I've ever heard is that the holster does sit quite low, but again I've never found it to be an issue.

Sent from my ADR6425LVW using Tapatalk 2

[Badwolf75]

http://img.tapatalk.com/d/13/02/21/e8yzypyd.jpg
Here you go.

Sent from my ADR6425LVW using Tapatalk 2

[phil413tx]

That is what I want to see! Thanks! That is a great holster!

[aKahrt_and_p2KT]

Damn it. Bad wolf, give me your phone number so my wife can call and rant you out when another holster shows up at my door j/k

Thanks for posting the pic.

[JFootin]

I have one of the standard ones for my CM9 (lefty). I didn't like it for the following reasons:


It is very diffcult to reholster because it is stretch spandex material that collapses when the gun is removed. The pro version would solve that, but it looks like it also adds a lot to the width.
The backing is a full 1/4" thick, adding to the bulk. The holster is so much bulkier than it needs to be.
The backing doesn't stay flat against my spare tire; it bows out at the edges, printing badly.
The backing rubs sideways against my body when I bend, sit or stand up. It cushions my body from the gun, but that roughness and tendency to rub would preclude wearing it without substantial clothing behind it.
All of this makes me constantly aware that I am wearing the holster. My PJ Kydex IWB completely disappears from my discernment when I wear it, and it doesn't move or rub me when I move. I have to reach and touch my gun to tell I am wearing it.

Anybody want a left handed N82 holster for a PM/CM/MK9/40 or other similar guns? $25 shipped. PM me.

[Yogi 117]

I will back up Badwolf75's pic with my Glock26 holstered in the N82 "PRO" model. You all know the G26 is a brick compared to the CM9, but I love this holster any time of the year for the ease & comfort. The pad feels great against my skin during the summer, while keeping the entire gun away from my skin. Easy on & off and the clip is adjustable for the cant you like. Re-holstering is a breeze, but I caution you the "Twist" needed to release the gun from this holster takes some getting used to. This is actually the most comfy IWB holster for my G26 by far. Enjoy! :D

http://i1117.photobucket.com/albums/k596/jdud77777/GlockN82.jpg

[Badwolf75]

Hope you enjoy your holster. If I can ever afford a PM9, it will go in the same holster. One word of advice, avoid sandpaper stick on type grips. They will shred the leather backing. The rubberized ones work just fine though.

Sent from my ADR6425LVW using Tapatalk 2

[aKahrt_and_p2KT]

I have a cm9 with a rubber grip but good advice. Does the clip screw off or tighten to hold cant? I figure I have to give this one a try, nothing else was really interesting me that I have not tried.

[Yogi 117]

I have a cm9 with a rubber grip but good advice. Does the clip screw off or tighten to hold cant? I figure I have to give this one a try, nothing else was really interesting me that I have not tried.
The screw does indeed tighten the belt clip at the desired cant. I always check the tightness before wearing to make sure it hasn't worked loose. I think you'll be amazed at how comfy this holster is! Enjoy! :D

[aKahrt_and_p2KT]

Sounds good, lately I've been switching clips on what I have been using to satisfy my rude height need. I have a crossbreed clip on my clip n go now which works pretty nice.

[aKahrt_and_p2KT]

actually I might have to delay my order for a little bit, but still interested in trying these some day.