K-9 flush fit mags?

[JohnR]

Long shot, but since putting 1911 mags in my CW45, I started wondering if there's a similar mag that fits the K9, flush base plate, and 8 rounds?

:popcorn:

[JohnR]

I guess not!

[wyntrout]

I've wondered the same for other calibers, but I don't have anything but Kahrs in single-stack 9mm. It's easier to try different ones for the Kahr .45's because most also have 1911's.

Wynn:)

[jpshaw]

Long shot, but since putting 1911 mags in my CW45, I started wondering if there's a similar mag that fits the K9, flush base plate, and 8 rounds?:popcorn:

Hey, I would be happy with a flush 7 round mag. You can put the CM mag baseplate on that is flush with the CM9 but hangs down a bit on the K9 or P9. It would take a shorter mag "tube" to be truly flush.

[LorenzoB]

I recently bought a K9, so I'll be looking at making a custom CNC machined baseplate that matches the gun better. It won't be flush, but it will look much better. I am still working on the design of the other one I did for my CW9 here and there when I get time. My normal work has been very busy, which is awesome, but it doesn't leave me much time for the fun stuff. I'll get there eventually! Then when it is all dialed in, I will offer them for sale on the web.

[jpshaw]

Doesn't the mag you did for your CW9 fit your K9. Unless I've gone brain dead lately, the K9, CW9 and P9 all share the same mags.

[LorenzoB]

Doesn't the mag you did for your CW9 fit your K9. Unless I've gone brain dead lately, the K9, CW9 and P9 all share the same mags.

The baseplate I did for my CW9 matches the contours of the CW9 grip. I want to make one that better matches the K9. I haven't tried it on the K9, but in my mind it was designed for the polymer guns.

8230

[got2hav1]

I would be very interested as well in a flush fit mag for the K9!

[wyntrout]

There's always the Black metal base kits for 9mm/40 Kahrs. i never bothered with my K9 because I don't carry it, but I did put those on my P40, P9, and my PM9.

http://www.kahr.com//Magazines/Kahr-Steel-Magazine-Base-Kit-Black.asp

I like the closer to flush fit and the loss of the pinkie thingy.

For the P40 I needed to add a 3/32" by 3/4" inner diameter O-ring to stop pinches... did that preemptively on the P9. I also darkened the lower part of the magazine so that there was no "shiny" showing... to your own taste, though. I prefer stealth for a CONCEALED weapon!

http://www.kahrtalk.com/showpost.php?p=208205&postcount=4

Wynn:D

[7shot]

This looks to be exactly what the OP is looking for, except for the 8 round mag part. i didn't know Kahr even made these.

[got2hav1]

I ordered a couple of these from Kahr and hope they will do what I want. Thanks for the tip.