View Full Version : dry fire
AIRret
07-06-2013, 05:36 PM
Does it matter if you have a magazine in your gun when you dry fire?
I saw a u-tube video the other day that said you shouldn't dry fire a 1911 without a magazine. So is that true?
And what about Kahrs?
AIRret, I deliberately leave the mag out.
After every dry-fire trigger pull, I was taught to execute an immediate action drill (tap, rack, reassess/bang). The purpose is to condition oneself to clear malfunctions, without hesitation.
Racking with an empty mag would result in a slide lock, so I leave the mag out.
BTW, the USMC operator (ret) who taught me this, shoots a 1911. He dry-fires w/o a mag.
jocko
07-06-2013, 07:15 PM
I wonder why it would make an difference in any semi auto. A magazine has nuttin to do with the action. With a kahr just a 1/4 pull back on the slide and ur good to g o again for dry firing. or u can do the drill and give the slide a full retraction and be good to go but if u have a magazinein there it is gonna lock open that way to.
AIRret
07-06-2013, 08:08 PM
I always dry fire without the mag because of the reasons you folks listed above.
However, there was a u-tube video to the contrary and since I DEFINITELY do not know all there is to know about guns, I thought I would ask.
Thanks folks, I guess I'll just go back to what I've always done, dry fire without the mag.
gb6491
07-06-2013, 08:17 PM
I wonder why it would make an difference in any semi auto. A magazine has nuttin to do with the action. With a kahr just a 1/4 pull back on the slide and ur good to g o again for dry firing. or u can do the drill and give the slide a full retraction and be good to go but if u have a magazinein there it is gonna lock open that way to.
There are some semiautomatic pistols that can be damaged by dry firing without a magazine in place. One that comes immediately to mind is Ruger's P345. It has a magazine disconnect safety; the safety's plunger and firing pin can be damaged if the magazine is not in place to operate the safety.
Regards,
Greg
muggsy
12-30-2013, 12:50 PM
Dry firing can work harden the firing pin of a 1911 and cause it to fail. You should only dry fire a 1911 using dummy rounds or snap caps. You don't have to cycle the slide to cock the hammer. Mag out won't hurt a thing.
O'Dell
12-30-2013, 12:57 PM
There are some semiautomatic pistols that can be damaged by dry firing without a magazine in place. One that comes immediately to mind is Ruger's P345. It has a magazine disconnect safety; the safety's plunger and firing pin can be damaged if the magazine is not in place to operate the safety.
Regards,
Greg
That's true - I had one of those monsters. Good gun but big and heavy. I only have one other pistol with the mag safety, a S&W CS45. I wonder if the same rules apply.
garyb
12-30-2013, 01:57 PM
Does it matter if you have a magazine in your gun when you dry fire?
I saw a u-tube video the other day that said you shouldn't dry fire a 1911 without a magazine. So is that true?
And what about Kahrs?
Airret, I dry fire practice with my PM40 all the time. Great practice especially with a CTL. I practice both with and without a mag in, depending on what I am practicing. Sometimes I practice mag exchanges during dry fire. As far as the PM is concerned...does not matter. Just keep practicing. I am sure it causes some type of very minor wear...like anything. But I feel the practice is important. Whatever wears out, whether it is shooting it or dry fire practice, I will replace. I've been doing this for a few years without any problems.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.