Disassemblied and lub points

[Allen]

For some reason I'm not finding the thread that shows a PM/CM9 disassembled, indicating the lub points, and parts names. I thought that site was really easily recognized and simple to find but for some reason I'm lost, kind of my usual Senior Moment. Please help.

[TucsonMTB]

Although you are not a new guy and your gun is not new . . . try the new member section. http://www.kahrtalk.com/forumdisplay.php?f=56

Here's the lube diagram from that area.

http://i1038.photobucket.com/albums/a466/btowngeorge/KahrLubePoints.jpg

[QuackXP]

Excellent, much better than what is in the manual. I'll have a much better idea what to lube after the wait from an internet order for my CW9 to arrive.

Thanks.

[OldLincoln]

Can somebody PLEASE photoshop the pic and remove lube point 7? We are telling them to lube the striker channel in the pic then not to do that in the forum.

[TucsonMTB]

Can somebody PLEASE photoshop the pic and remove lube point 7? We are telling them to lube the striker channel in the pic then not to do that in the forum.
Really? I took that to suggest the surface of the area that engages the cam might benefit from a small amount of lubrication. I usually apply a tiny amount of grease that won't migrate into the striker channel.

Whatever . . .

[Tinman507]

Is this any better?
Can be changed easily if needed

http://i1147.photobucket.com/albums/o542/tinman507/KahrLubePoints-REV_zps1189e73e.jpg

[Allen]

Thanks Tucson, that was what I was looking for.