It's Normal...Don't Worry

[Rubb]

Answers to FAQ's :)

8769

8770

[jocko]

coo. very nice job,

[RevRay]

Uh oh ... I'm not sure I've got the protrusion at the back end of the frame.

[olsenjb]

Hey Rubb...I believe you may have posted these pics in response to my thread asking about that polymer piece protruding at the rear of the slide. I e-mailed almost that identical pic to Kahr, and they immediately responded with an RMA and a pre-paid overnight FedEx label. Any idea why they'd do that if it's normal? Thanks for posting your pics...I really appreciate it.

[jocko]

I would suspect they will buff that area down. certainly a new replacement would reqire a new ffl registeration. I amsurpised kahr ask for it back to..keep us posted. I can't say it is just normal but it is not really abnormal IMO..

[jocko]

I would suspect they will buff that area down. certainly a new replacement would reqire a new ffl registeration. I amsurpised kahr ask for it back to..keep us posted. I can't say it is just normal but it is not really abnormal IMO..

every once in awhile when some hot blonde walks in this restaurantthatI frequent. I seem to get a protrusion. Is that normal????Just askin

[olsenjb]

every once in awhile when some hot blonde walks in this restaurantthatI frequent. I seem to get a protrusion. Is that normal????Just askin

LOL...that's some funny stuff. I about fell off my chair. Thanks for the laugh.

[jocko]

wasn't funny~!! I am serious. I'm70 and is this normal???? Just sayin

[JohnR]

wasn't funny~!! I am serious. I'm70 and is this normal???? Just sayin

Does it last more than 4 hours?

[jocko]

only if I don't rubb it like a jeannie bottle!!! Just sayin:blah::blah::blah:

[downtownv]

Uh oh ... I'm not sure I've got the protrusion at the back end of the frame.

God blessed me.... My protrusion is on the front of my frame:D

[RevRay]

Hey, that's not fair ... my post was a comment about something said before this thread went south.

[jocko]

south??? I live in the north,couldn't be ol jocko. My guess is downtown, muggsy, tinman, getsome. Just sayin.

[Rubb]

Hey Rubb...I believe you may have posted these pics in response to my thread asking about that polymer piece protruding at the rear of the slide. I e-mailed almost that identical pic to Kahr, and they immediately responded with an RMA and a pre-paid overnight FedEx label. Any idea why they'd do that if it's normal? Thanks for posting your pics...I really appreciate it.

Yeah...the question is asked quite a bit though...keep us posted.

[RogerP9fan]

YB NORMAL?
Well, normal is good. Thanks for posting.

[muggsy]

wasn't funny~!! I am serious. I'm70 and is this normal???? Just sayin

That's the only part of you that is normal, Jocko!

[muggsy]

south??? I live in the north,couldn't be ol jocko. My guess is downtown, muggsy, tinman, getsome. Just sayin.

Muggsy lives in the Great White north. Buckeye by accident of birth. At least my old man told me my birth was due to an accident that he had in the backseat of his 1940 Ford. Go figure.

[Django]

I threw up a little bit in my mouth. Thanks for the op and pix Rubb! I was looking at those things on mine earlier (protrusion excluded).

[olsenjb]

Well...just wanted to give an update. I received my PM9 back today...almost 2 weeks to the date from when I shipped it to them. Not too bad in my opinion.

All it says is that they "Reworked Ejector and Frame-Lubed and Test Fired-OK"

There is no more polymer protruding from the rear of the slide, so that's good. Any thoughts on what they mean by "Reworked Ejector"?

[Rubb]

? probably sounds better than "filed frame" ?

[ripley16]

Not all polymer Kahrs bulge at the front rails. Early polymer frames were made flat, or parallel, however one describes it. Nor do all early polymers have a notch in the front rail. Both of these changes came some time later after the introduction of the P9.

[MikeyKahr]

Any thoughts on what they mean by "Reworked Ejector"?

Talk about an opening.

[MrToad]

Rubb, just don't confuse folks when they watch the Kahr takedown videos and talk about yet another pistol protrusion.:D

[Rwdrive]

I had the same polymer protrusion at the rear of the gun under the slide after first trip to the range with PM9. Kahr said it was just cosmetic, but I could send it in. I did, 8 weeks later I got it back yesterday. They said the projector was out of spec. They fixed it and smoothed out some spots of polymer slag( I told them there other rought spots in the frame). Just got back from 75 rounds and no more protrusion. I do have the bowed rails on this gun too.

[muggsy]

I have a protrusion at the front of my frame, but since my circumcision it doesn't protrude
quite as much. Mine doesn't have a serial number, so I can buff it all that I want. Just sayin.