7 rnd mag problem

[kiki]

ok, not to beat a dead horse..but my 7 rnd pm9 mags started to f@#% up...never did before...if i load gun with 8 rnds (1 in chamber and 7 rnd mag) on the 2 or 3 rnd shot the cartridge nose dives and FTF...but if i load gun with 7 rnds (1 in chamber and 6 rnds in 7 rnd mag) it doesnt happen at all....go figure...i did follower fix, changing angle...well see next trip to range....i only use 6 rnd mags when i carry....never had issues with 6 rnd mags....

[yqtszhj]

Check out HarryLee's post below. Smoothing the inside of the follower where the spring goes along with trimming the mag spring fixed my 8 round mag. You might try this on your 7 rounder:

http://kahrtalk.com/showthread.php?t=17326

[jocko]

kiki, try putting the 6 round mag spring in the 7 round mag tube ans see what happens. Ur not cuttinganything but just testng things out.

Make sure that mag follower is also not grabb8ing on that mag releasebutton, for it will happen at the round count thatyour saying to. the propper prep thread tells you how to check that and the fix is maybe 5 minutes.. all ur doing here is elim9nating the possabilities.

[Harrylee]

I have always thought that the mag spring was too strong. You will see in my post that I have found good success with a lesser spring, I have in all my 8 round mags a 6 round spring and that doesn’t force the top round as much to do a dive have not tried 7 round mags but the less mag spring will help. I do the follower mod on everything just makes things work better, give a try and find out for yourself. What works is the important thing, you have to keep on trying till you find the right balance. Good luck

[Matthew L.]

Make sure that mag follower is also not grabb8ing on that mag releasebutton, for it will happen at the round count thatyour saying to. the propper prep thread tells you how to check that and the fix is maybe 5 minutes.. all ur doing here is elim9nating the possabilities.

That's the problem I had with mine. I sanded some material off the follower where it meets the mag catch and it fixed it.

[Shadetree]

ok, not to beat a dead horse..but my 7 rnd pm9 mags started to f@#% up...never did before...if i load gun with 8 rnds (1 in chamber and 7 rnd mag) on the 2 or 3 rnd shot the cartridge nose dives and FTF...but if i load gun with 7 rnds (1 in chamber and 6 rnds in 7 rnd mag) it doesnt happen at all....go figure...i did follower fix, changing angle...well see next trip to range....i only use 6 rnd mags when i carry....never had issues with 6 rnd mags....



My P9 Covert will not lock the slide back when using the 7 round mag with the bigger base plate on it. Haven't tried a regular 7 rounder since all my Kahrs took the short mags but I recently got a K9 and will give them a try next time I get a chance.