P380 - Wolff 10%+ 3AT Mag Springs

[slacker218]

Just joined... Been lurking for a long time... Just now have a question I couldn't find an answer to.

I thought I read a while back someone ordered the Wolff 10%+ power Kel-Tec 3AT mag springs for their P380. I couldn't find any followup? Did it help to smooth things out?

I'm sitting on a crud load of WWB .380 95 gr. flatnose and go figure - that is the only stuff that I can't get to cycle reliably. Except for Herters / MFS... Wondering if some stronger mag springs would help.

Thanks!

[jocko]

Just joined... Been lurking for a long time... Just now have a question I couldn't find an answer to.

I thought I read a while back someone ordered the Wolff 10%+ power Kel-Tec 3AT mag springs for their P380. I couldn't find any followup? Did it help to smooth things out?

I'm sitting on a crud load of WWB .380 95 gr. flatnose and go figure - that is the only stuff that I can't get to cycle reliably. Except for Herters / MFS... Wondering if some stronger mag springs would help.

Thanks!

mag springs will enhance feeding issues. I have the 10% more power in my P380 and like what they do to make the slide lock work much much better, but I had no feed issues before I went to those springs. I only had some sporadic slide not locking back on the last round. They are good springs , they certainly will not upset anything else in the gun, so for me I say try um. Ihave no problems either with loading 6 rounds in the magazine. I just was never a fan of the flat nose ammo, of any brand, They are supposed to work as we all know but I just shy away from them..

[vitog1946]

I had the same problem with the last round not locking the slide back. took mag spring out and follower with 0000 sandpaper smooth out the follower of any burrs on follower be gentle only slight sanding . works just great no more problems. let me know if it works for you. again only very light sanding.