Kahr K625G magazine

[ParanoidMedic]

I goofed up and bid/won an ebay auction for this 6 round magazine.From what the description says for PM45 only. I didn't read the decription and what I really wanted was a 6 round magazine for the CW45. I was wondering if this will fit the CW45 also.
Thanks in advance.


http://www.ebay.com/itm/Kahr-Arms-PM45-Magazine-45-ACP-6-Round-Stainless-Steel-w-Grip-Extension-K625G-/321264183812?_trksid=p2047675.l2557&ssPageName=STRK%3AMEWNX%3AIT&nma=true&si=KKOGOzTRaGjHd1RvmdH%252FlHXU1MM%253D&orig_cvip=true&rt=nc

[wyntrout]

No, the base is too high on the G model... extended base.

You need the 625, or a regular base for the G-model.

Here are pictures of my PM45 magazines:

http://www.kahrtalk.com/attachment.php?attachmentid=1133&stc=1&d=1271091975

From the top down:

K725
K725G
K725G
K625G
K525. You can't use the lower two. The K625G would work if you replaced the extended base with the regular "flush fitting" polymer base.

http://www.kahr.com/Pistol-Parts/Kahr-038CW45-Magazine-Base.asp

The lower two fit "flush" in the PM45. I've since replaced the upper one with another G-model. I carry the "high capacity" K725G's for reloads, or use them the range.

Here's that post: http://www.kahrtalk.com/showthread.php?t=1854&highlight=PM45

The link to Kahr's magazine guide:

http://www.kahr.com/kahr-mag-guide.asp

Wynn:)

[ParanoidMedic]

Thanks wyntrout

[wyntrout]

When I click your link I get two K625 pictures in the upper left... both use the same K625 picture, but the right one is listed as the extended-base K635G. The seller used the wrong picture. maybe you can stop the sale or get him to send the one you want.

I checked to see if I had a spare regular base, but I don't.

Wynn

[Bawanna]

I see he has 14 day return, buyer pays shipping. Send it back.

[ParanoidMedic]

The seller was gracious and allowed me to cancel.

[wyntrout]

Fantastic! I'm glad that worked out ok!

Wynn:)

[gb6491]

For future reference: there's nothing that precludes sanding down the top of the new style extended base plate so that it would fit and function as a standard size base plate (you could even tailor the fit to reduce the gap between the plate and the grip bottom if you so desired). You might be able to do the same with the old style extended base plate, but the shape of it at it's rear could be an issue.
Regards,
Greg

[ParanoidMedic]

For future reference: there's nothing that precludes sanding down the top of the new style extended base plate so that it would fit and function as a standard size base plate (you could even tailor the fit to reduce the gap between the plate and the grip bottom if you so desired).

I was thinking the same thing or just get a new set of floor plates if the seller did not let cancel.
Since it's Saturday I decided to go to my LGS and see if they had any mags for it. They did not, but I did pick up a brown Tagua OWB holster that was formed fit for the Keltek PF9, that the CW40 slipped nicely into, for$34 out the door. Looks just like this one:
http://i43.tinypic.com/15my8f4.jpg