View Full Version : help with k9 slide being stuck
hbschwartz
03-24-2014, 06:31 PM
i have a kahr k9. i cannot get the slide off. the guide rod is protruding from the slide. please help. thanks.
muggsy
04-16-2014, 11:13 AM
How in the hell did you get into this predicament, HB? Have you removed the slide stop pin? This may be a job for someone with a much weaker mind. Jocko should be along any minute to help you out. :)
muggsy
04-16-2014, 12:32 PM
Well, we can't wait forever for Jocko. Assuming that the guns chamber is empty, the magazine has been removed and the slide stop pin has been removed, draw the slide back until it's even with the frame and pull the trigger. Allow the slide to go forward and if it stops release the trigger. The slide should then come off. Sometimes it take a little trigger and slide manipulation to remove and or replace the slide. If that doesn't work let me know. It shouldn't take any force.
jocko
04-16-2014, 03:59 PM
trying to figure out what the hell is actually goin on, but your suggestion Muggs is certainly a starting point. If the guide rod is sticking out I can assume then the slide is partially back from its normal resting position. Not sure what the owner is really tryingto do either. Hopefully he ha snot taken it apart and then upon reinstalling it put the slide stop lever in front of the barrel lug, this will lock the slide up faster than a flock of sheep onEXLAX. I need to know more, as I am not as smart as u muggs who can read minds of utters and come up with an answer even before they know they have an issue..
muggsy
04-16-2014, 05:49 PM
Oh, this guy has issues all right. His slide won't come off. He has almost as many issues as you do you old fart. Is your guide rod sticking out? :)
jocko
04-16-2014, 05:50 PM
u can kiss it and it will go back in OK. Just sayin Monica, I mean muggsy.
muggsy
04-16-2014, 05:56 PM
See how your are. I try to help a guy out and all you can think of is sex. Speaking of which, did you hear the one about the near sighted ram that fell off of the cliff. He didn't see the ewe-turn. :) Good sheep joke, eh?
jocko
04-16-2014, 05:57 PM
unless ur the ram, u sick bastard!!!
b4uqzme
04-16-2014, 10:35 PM
gee I wonder how hbs is doing?
muggsy
04-17-2014, 06:27 AM
Who? :)
muggsy
04-18-2014, 11:03 AM
I would have to assume that by now Schwarts was successful at removing the slide from his K9. He couldn't possibly have committed suicide with it as the slide was stuck. And this is the thanks we get for helping him out. Nada. :)
b4uqzme
04-18-2014, 11:27 AM
...you never asked for anything in return and that's what you got. :D
muggsy
04-18-2014, 12:13 PM
I always get what I don't ask for. How is that? Maybe he used the Schwartz. (With apologies to Space Balls) :)
RevRay
04-18-2014, 03:36 PM
I would have to assume that by now Schwarts was successful at removing the slide from his K9. He couldn't possibly have committed suicide with it as the slide was stuck. And this is the thanks we get for helping him out. Nada. :)
Actually, if you were successful in helping him get the slide unstuck, and he then did the unthinkable, that would explain why you've heard no more. Though, to be fair, it would have been nicer if he had said thanks first ... just saying.
Bawanna
04-18-2014, 03:59 PM
With this kind of help he's probably happily ensconced over on the Glock forum.
100percent
04-18-2014, 06:12 PM
Kind of funny was that he had two identical posts 2 minutes apart a month ago.
jocko
04-18-2014, 07:34 PM
I would have to assume that by now Schwarts was successful at removing the slide from his K9. He couldn't possibly have committed suicide with it as the slide was stuck. And this is the thanks we get for helping him out. Nada. :)
when u assume , u make an ass out of u and me, my bet is that schwartz read your perverted posts to me and felt that he was on the worng forum. I emaile dhim directly and we worked it out ok. I can't say exactly what he said when I told him how to fox it but i know the word masterful and genius was in the same sentence. Just sayin
muggsy
04-19-2014, 08:23 AM
With this kind of help he's probably happily ensconced over on the Glock forum.
No one, but no one is happily ensconced in the Glock Forum. The Glock Forum is a hell hole of misery. The Kahr Forum is like W. Virginia, almost heaven. Heck, we even have our own RevRay.
muggsy
04-19-2014, 08:29 AM
when u assume , u make an ass out of u and me, my bet is that schwartz read your perverted posts to me and felt that he was on the worng forum. I emaile dhim directly and we worked it out ok. I can't say exactly what he said when I told him how to fox it but i know the word masterful and genius was in the same sentence. Just sayin
If there is one thing in this world that I know for sure it's that the words masterful and genius will never appear in the same sentence with the word Jocko. Dimwit and dunce, maybe. I believe that you may be prevaricating just a tad there Jocko. I didn't even have a chance to send HB a decoder ring yet.
muggsy
04-19-2014, 08:33 AM
Actually, if you were successful in helping him get the slide unstuck, and he then did the unthinkable, that would explain why you've heard no more. Though, to be fair, it would have been nicer if he had said thanks first ... just saying.
HB seems to be a man of few words. Thank and you aren't even in his vocabulary. That's Ok, I'm sure that he'll need our assistance again someday and I'll be among the first to bend over backwards. Yeah, right. Just sayin.
b4uqzme
04-19-2014, 11:15 AM
If there is one thing in this world that I know for sure it's that the words masterful and genius will never appear in the same sentence with the word Jocko. .
^^^ They just did. :rolleyes:
muggsy
04-19-2014, 05:52 PM
^^^ They just did. :rolleyes:
There's an exception to every rule. :)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.