CW9 Trigger Pin

[rahmann62]

The trigger pin on my CW9 works its way out when I fire the gun. I tap it back into place and within 10 rounds it is back out again. It causes a blister on my finger. Any suggestions on how to fix this problem?

[gb6491]

The trigger pin on my CW9 works its way out when I fire the gun. I tap it back into place and within 10 rounds it is back out again. It causes a blister on my finger. Any suggestions on how to fix this problem?

jocko posted some time back about tapping that pin back in with a small punch (most likely seating it a little deeper): http://www.kahrtalk.com/showpost.php?p=191914&postcount=8
You might also try putting a little finger nail polish/thread locker/super glue on the pin before tapping it back in place
Regards,
Greg

[wyntrout]

Tapping doesn't work that well, but pressing it in does. Here's my post on that:

http://www.kahrtalk.com/showthread.php?t=3452&highlight=PM45+trigger+pin

http://www.kahrtalk.com/attachment.php?attachmentid=2424&stc=1&d=1285264836

Wynn:)