View Full Version : P380 Night Sights?
MarkB1
06-29-2014, 07:20 PM
OK, I've checked Trijicon, Meprolight, Ameriglo, Kahr Store and XS Sights. XS Sights Big Dot and Regular Dot are the only night sights I've found. No one lists any other night sight sets for the P380. I know there are other night sights out there but I can't find them. Any suggestions?
flyfishdave
06-30-2014, 06:24 AM
Dawson Precision.
I had them make me a fiber optic front with plain black rear that works great. They list a tritium night sight version, but can make anything you want.
One caveat, removing the factory installed front and rear sights require (at least for me) a good sight pusher.
MarkB1
06-30-2014, 09:10 PM
Dawson Precision.
I had them make me a fiber optic front with plain black rear that works great. They list a tritium night sight version, but can make anything you want.
One caveat, removing the factory installed front and rear sights require (at least for me) a good sight pusher.
Thanks flyfishdave. It'a begining to appear that the XS Sights Big Dot and Regular Dot may be the only night sights readily available for the P380 other than custom sights.
Does anyone know of commercially ready-made night sight sets for the P380?
Edit: I have found a Trijicon P380 set on the Kahr site.
flyfishdave
06-30-2014, 09:45 PM
http://www.dawsonprecision.com/ProductDetail.jsp?LISTID=80001990-1394898618
http://www.dawsonprecision.com/ProductDetail.jsp?LISTID=800017AD-1388518379
(make sure you order the 0.180" high front to pair with their rear)
The Dawson sights are definitely worth the wait. While they quote 2-3 weeks, sometimes you get the order faster. They have excellent customer service and stand behind their product. Give them a call and they may surprise you.
Personally, I'm not a fan of the XS big dot system and the ambiguous rear sight. Same with tritium...I used to only spec tritium on all my platforms but have switched to plain black rears and a painted (red) front sight or a fiber optic. Unless you find yourself in a cave 100' below sea level, there will always be enough ambient light to cover your target with the muzzle/slide profile to make close contact hits.....the P380 is not a bianchi cup gun. Green dots or a combination of green/yellow, etc will only distract you under stress.
In the rare instance I think about the sights, I just look for the red fiber optic. Otherwise, it's just snap shooting at center of mass.
Not all fiber optic fronts are the same. The dawson has a counter-sunk fiber so you don't get a blow out bloom of light.
When available for my platforms, I use 10-8 rear plain U-notch sights - but all my fronts are Dawson plain and fiber optics.
Let me see if I can get a pic up for you......
Dave
flyfishdave
06-30-2014, 10:27 PM
Here are some pics....sorry for the crappy iphone pics. Didn't feel like setting up the DSLR, 100mm macro and ringlight.
https://farm6.staticflickr.com/5493/14361050510_84bed48eb1_c.jpg (https://flic.kr/p/nT38Z9)
https://farm4.staticflickr.com/3882/14361050120_403ae31113_c.jpg (https://flic.kr/p/nT38Sq)
https://farm3.staticflickr.com/2924/14361242207_3856cff104_c.jpg (https://flic.kr/p/nT47Yg)
MarkB1
06-30-2014, 10:40 PM
Looks good. Another option that matches the sights on my Springfield XD-S. A good idea to have similar sights on different guns.
flyfishdave
06-30-2014, 10:56 PM
Yup. the XD-s has a perfectly serviceable OEM front fiber optic sight. I didn't like the 'white' dots on the rear so I painted them black.
MarkB1
06-30-2014, 11:09 PM
I like the sight picture with your sights. What is the width of your rear sight abd how did you order it? The same .180" high sight for the fiber optic?
flyfishdave
06-30-2014, 11:29 PM
Due to the focal length/zoom setting and lens to sight distance, the sight picture in the photos is not what I see when hold the P380 out at arms length.
My front and rear sights are both 0.125" wide; I quickly place the glowing red dot b/t the rears for a quick sight picture, or center the front b/t the rears with a thin amount of daylight flanking the front blade for an 'aimed' sight picture.
If you want a sight picture closer to what the picture shows, you may want to go with their 0.100" wide/0.180" tall front. Alternatively, you can ask them to widen the rear notch. If you have another sub compact gun with a similar sight radius with a sight picture you like, take some measurements to get a rough idea of the front vs. rear difference.
Their P380 tritium rear is a stock item and you can order it off the website. I wanted a plain rear which is not currently a stock item so it was technically a 'custom' order so I paid $10 more over their other plain black rear sight price.
Call them up and they will square you away.
MarkB1
06-30-2014, 11:44 PM
Thanks for the good info
Stealthfixr
09-08-2015, 06:36 PM
Any other P380 night sight advice? Anyone happy with the XS Big Dot front sight?
GA_Sheepdog
09-08-2015, 06:58 PM
Here are some pics....sorry for the crappy iphone pics. Didn't feel like setting up the DSLR, 100mm macro and ringlight.
https://farm6.staticflickr.com/5493/14361050510_84bed48eb1_c.jpg (https://flic.kr/p/nT38Z9)
https://farm4.staticflickr.com/3882/14361050120_403ae31113_c.jpg (https://flic.kr/p/nT38Sq)
https://farm3.staticflickr.com/2924/14361242207_3856cff104_c.jpg (https://flic.kr/p/nT47Yg)
I know this is an old thread but does anyone make a sight like this for the cw380? I wish 10-8 made the u-shaped serrated rear sights for Kahrs.
gb6491
09-09-2015, 12:59 PM
I know this is an old thread but does anyone make a sight like this for the cw380? I wish 10-8 made the u-shaped serrated rear sights for Kahrs.
Those are Dawson Precision sights. You might check with them:
https://www.dawsonprecision.com/WSWrapper.jsp?mypage=StoreContactUs.htm
Our Physical Address:
Dawson Precision, Inc.
3300 CR 233
Florence, TX 76527
For the Best Service, Please Call:
(Toll Free) 866-300-1911
When placing an order by phone, PLEASE have your PART NUMBERS ready!
E-mail: (please call us if you get no response after 3 business days)
Sales Support: sales@dawsonprecision.com
Tech Support: tech@dawsonprecision.com
Fax: 254-793-0159
Voice: 254-793-0150
Open 9 to 5 CST Monday through Friday
Regards,
Greg
GA_Sheepdog
09-09-2015, 01:01 PM
Those are Dawson Precision sights. You might check with them:
https://www.dawsonprecision.com/WSWrapper.jsp?mypage=StoreContactUs.htm
Our Physical Address:
Dawson Precision, Inc.
3300 CR 233
Florence, TX 76527
For the Best Service, Please Call:
(Toll Free) 866-300-1911 (tel:866-300-1911)
When placing an order by phone, PLEASE have your PART NUMBERS ready!
E-mail: (please call us if you get no response after 3 business days)
Sales Support: sales@dawsonprecision.com
Tech Support: tech@dawsonprecision.com
Fax: 254-793-0159 (tel:254-793-0159)
Voice: 254-793-0150 (tel:254-793-0150)
Open 9 to 5 CST Monday through Friday
Regards,
Greg
Thank you friend. ;)
MurrayNevada
09-17-2015, 11:00 PM
Any other P380 night sight advice? Anyone happy with the XS Big Dot front sight?
Very happy with the XS Big Dots. Quickest for my old eyes to see. I have them on all my carry pistols.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.