PDA

View Full Version : P380 Frame Question



MarkB1
07-04-2014, 07:15 PM
There is a small flare in the frame at the rail on both sides that runs from the muzzle end of the frame to about the frame take down index mark. The flare sticks out about 1/32" or a little less at the maximum point. However, both rails in the frame are straight and fit very closely to the slots in the front of the slide with no play. Now, I don't think this is a problem. Since I corrected the slide stop interference, the P380 has run perfectly.

See the photo and the flare can be seen. The rear of the frame matches the slide perfectly.

What's your opinion?

http://i1082.photobucket.com/albums/j374/msbeam1/P7040034.jpg (http://s1082.photobucket.com/user/msbeam1/media/P7040034.jpg.html)

patbelly
07-04-2014, 09:12 PM
Normal. All my Kahr pistols are like that.

MarkB1
07-04-2014, 09:20 PM
Thanks

muggsy
07-05-2014, 08:02 AM
Normal. All my Kahr pistols are like that.

Ditto. Nothing to see here. Please move along and shoot that fokker like you stole it.

Bill K
07-05-2014, 03:20 PM
Yeah, messed with my head when I first noticed it with my PM9. Same thing with the notch in the rail.