Threaded bbl.

[diver454]

Is anyone aware of a vendor or manufacturer who sells threaded bbl for mk9? Want to use suppressor option.

[wyntrout]

I've never had a MK9 to compare with anything, but Kahr sells a ported 4" barrel that, if it would fit a MK9, could be cut and threaded... maybe?? I have no idea!

On sale: http://www.kahr.com//guide-rods-and-barrels/kahr-40andquot;-ported-barrel-k40-and-k40-covert.asp
http://www.kahr.com/GetDynamicImage.aspx?dir=itemImages&path=40andquot;-Ported-Barrel-K40-and-K40-Covert756.jpg&w=326&h=278 (http://www.kahr.com/GetDynamicImage.aspx?dir=itemImages&path=40andquot;-Ported-Barrel-K40-and-K40-Covert756.jpg&w=652&h=556)


http://www.kahr.com/GetDynamicImage.aspx?path=40andquot;-Ported-Barrel-K40-and-K40-Covert756.jpg&w=65&h=48


4.0" Ported Barrel (K40 & K40 Covert) Compensator for reduced recoil. May require fitting. K, P, CW Series & E9 only. Qty: $129.99 MSRP: $154.99

[jocko]

I would think kahrs extended portred barrel would not be servicable for threading..

[wyntrout]

4" Ported on the top... PM9 barrel on the bottom, with the two in the middle K9 and P9. If it fits the MK9, I was thinking that the ported one could be cut down and then threaded.

http://www.kahrtalk.com/attachment.php?attachmentid=6905&stc=1&thumb=1&d=1353060163

[diver454]

The cam size for each model is specific to that model and therefore can not be used in any slide then originally designed for.

[Tpsfoto]

I have an excellent standard MK barrel if you want to try to modify it? $50.00

[Barth]

The cam size for each model is specific to that model and therefore can not be used in any slide then originally designed for.

+1
Don't believe a K barrel will work in a MK.
And am unaware of any third party options.
Thinking you're out of luck.
I am Barth Six Barrels - LOL!

[mr.ed]

Wyntrout - excellent question and if there isn't a manufacturer today, should someone make them if enough customers want one? I think yes.