PM9 / CM9 Magazines

[CVMA.Monk]

I just picked up a PM9. It came with the 6 round mag labeled "MK Kahr". The CM9 mags I have are labeled "9-6 Kahr". They look identical to me.

Any difference other than the label?

[GA_Sheepdog]

From my experience the mags are all the same. If it's a 6 round mag it will say "9-6 Kahr" and if it's a 7 round "9-7 Kahr". I just purchased a 7 round mag from Cheaper than Dirt, it was labeled "9-7 Kahr", the package however stated MK9/PM9. It's all the same.

[CVMA.Monk]

Thanks.

[JimBianchi]

All the 6rd 9mm mags are interchangeable.

I've owned all three of the small 9's and all work perfectly with each other.

[CVMA.Monk]

Thanks.

[TimtheRef]

The smaller 6 round mag guns can also accept the longer magazines if you're interested. I.e. my 7 round P9 mags run just fine in my CM9. And I carry a CT380 mag as a backup to my 6 round P380. Kahr is good about that.

[CVMA.Monk]

I've got a bunch of the 7 round mags from the CM9 plus the one that came with the PM9. Good to know they'll all work. I read on the 9094A page on the Kahr Web site that the PM9 comes with two 6 rounders and one 7. I had one of each in the box. Did I lose one somewhere or did I just read the page wrong?

[CVMA.Monk]

Problem solved. Instead of hassling with the shop or with Kahr I just bought a couple of new 6 rounders.

[muggsy]

I've never been a fan of extended magazines. If I felt the need for more than a 6+1 capacity I'd buy a gun with a double stack magazine.

[CVMA.Monk]

I've got some 7 round for use at the range. I only carry with the 6 round mag.

[jocko]

I've never been a fan of extended magazines. If I felt the need for more than a 6+1 capacity I'd buy a gun with a double stack magazine.

and I bet ur also a cleveland browns fan to. that spells LOSER LOSER LOSER. Just sayin

[Seven High]

SOT I sure wish that Kahr would fix the magazine follower issue with their 9mm magazines. A metal follower would probably fix the issue.

[b4uqzme]

SOT I sure wish that Kahr would fix the magazine follower issue with their 9mm magazines. A metal follower would probably fix the issue.

I'm thinking they may have --- 9mm follower complaints are rare nowadays. But if you are interested in metal followers, there is only one source that I am aware = Lakelinellc.com Al's a good upstanding Kahrtalk member too!

[CPTKILLER]

They don't measure up at all especially against my Springfield EMP.

[b4uqzme]

They don't measure up at all especially against my Springfield EMP.

What? The magazines? :)

[GA_Sheepdog]

Yeah and you never hear about problems with the EMP. :rolleyes:

[Seven High]

Thank you for the information about the metal magazine followers. I will be contacting them shortly.

[norrisja]

I miss my EMP dudes. http://images.tapatalk-cdn.com/15/10/23/f90a7a3eee0c99557eb7580717a44e6e.jpg


Sent from my iPhone using Tapatalk

[norrisja]

I have EMP build porn too.


Sent from my iPhone using Tapatalk

[b4uqzme]

Thank you for the information about the metal magazine followers. I will be contacting them shortly.

I'm here to please. You are welcome.

[CVMA.Monk]

Sent my serial number to Kahr. Gun was shipped to the dealer in June 2013, before the 3 mag shipping started.

[muggsy]

and I bet ur also a cleveland browns fan to. that spells LOSER LOSER LOSER. Just sayin

I was a Cleveland Browns fan. Cleveland doesn't have a football team. They do have a damn good QB and one good receiver, but that does not a team make.

[muggsy]

SOT I sure wish that Kahr would fix the magazine follower issue with their 9mm magazines. A metal follower would probably fix the issue.

There's nothing wrong with a polymer follower. The followers break because the feed ramp is too long. There are thousands of Kahr pistols that feed just fine with the magazines just as they are.

[muggsy]

They don't measure up at all especially against my Springfield EMP.

And how much did you pay for your EMP? A bit more than my CM9 I'd wager.

[GA_Sheepdog]

Buds has EMP's going over a grand. I'd imagine other places such as LGS's would have them for quite a bit more.

[Seven High]

My CM9 has broken 3 polymer magazine followers in one year. The last one broke off at both the front and back leg. The only thing that the factory does is to send a new follower. I ordered and received metal followers from Lakelinellc. They are definitely high quality. I would recommend them to anyone.

[Alfonse]

Thanks, I'm glad you like them.

[PRMax]

My CM9 has broken 3 polymer magazine followers in one year. The last one broke off at both the front and back leg. The only thing that the factory does is to send a new follower. I ordered and received metal followers from Lakelinellc. They are definitely high quality. I would recommend them to anyone.


Glad you like the new followers. Just ordered three followers from Lakelinellc.

[Seven High]

Please let us know how your metal followers work. So far mine have worked perfectly.