Just found my favorite IWB holster!

[PBJ]

Wanted to pass these guys on to others as I'm quite pleased with their products. Pics here with the P380: http://imgur.com/a/qnd4I

Have been through quite a few from kydex to sticky holsters etc and came across these guys on eBay http://www.ebay.com/sch/outbags then check box that says Include description

I've got holsters paid almost 100.00 for and love this 16.99 one even more.

Website with not as many items listed is at www.outbagusa.com (http://www.outbagusa.com They) They use the ULTICLIP retention system on a clean simple and low profile design and this system works with anything from shorts to sweats and no belt is needed.

Glad to finally find a holster I really like and hope others enjoy these as much as I have.

*Here is the model for the P380 that attached pictures are http://www.ebay.com/itm/Inside-Pants-IWB-Tuckable-Holster-w-Comfort-Tab-for-Kahr-P380-MADE-IN-USA-/262673371087

[kwh]

Thanks. I have not seen their holsters. Unbelievable for $16.99 since UltiClip costs $10.00 or more. Does the clip maintain it's cant with the single screw attachment, or does it shift? Have you tried it appendix carry?

[downtownv]

PBJ the price is right and your opinion over ones that cost a lot more seem to make it worth a look
Here's their complete line:
http://stores.ebay.com/OUTBAGS-USA-Handcrafted-Holsters?_trksid=p2047675.l2563

[desmobob]

Cool idea but it sure seems like that clip would be uncomfortable against your side. How long have you been using it and what other IWB holsters did you use previously?

Thanks for pointing out an interesting product.

Tight groups,
Bob

[PBJ]

Thanks. I have not seen their holsters. Unbelievable for $16.99 since UltiClip costs $10.00 or more. Does the clip maintain it's cant with the single screw attachment, or does it shift? Have you tried it appendix carry?

Hi, the clip can be tightened and does hold it's cant and I have not had it shift and have run with it on etc. with no problems and appendix carry is where I usually carry and can hardly notice the P380 is there!

It also can be adjusted to sit lower or higher on waistline.

IMHO this deal can't be beat and ordered a few more for other firearms.

*Tried to get them to offer the mag pouches they offer with the UtiliClip but they said the don't do custom work or sell any parts. Like many, it seems to be a small family operation and if you look closely at the pics the quality is spot on even the webbing where hot knife cut is smooth.

I'm not one who likes to regularly wear a belt, however I am one to regularly carry.

[PBJ]

Thanks DT, THIS (http://www.ebay.com/dsc/m.html?_ssn=outbags&_armrs=1&_from=R40&_sacat=0&LH_TitleDesc=1&_nkw=ulticlip&_trksid=p2046732.m570.l1313.TR2.TRC1.A0.H0.Xulticl ip.TRS0&_odkw=utiliclip&_osacat=0) would be a better link and is the ones with UltiClip

*It looks like you need to be logged into eBay for this link to work.



PBJ the price is right and your opinion over ones that cost a lot more seem to make it worth a look
Here's their complete line:
http://stores.ebay.com/OUTBAGS-USA-Handcrafted-Holsters?_trksid=p2047675.l2563

[PBJ]

Hi Bob,

As stated above, this is IWB holster. The clip doesn't touch your body and have had it long enough to fall in love with it and share it with the masses before they likely raise the prices due to popularity! Shipping was Free and arrived fast USPS.

Have used quite a few and spent way more $$$ than I probably should have but if holster does not fit and function right i'm on to the next. As far as brand names go, I know a lot of these companies are small operations and I don't want to speak bad about any of them and realize I did on one in original post and have since edited it. I've found out the hard way, what holster works great for one person doesn't always do so for another.


Cool idea but it sure seems like that clip would be uncomfortable against your side. How long have you been using it and what other IWB holsters did you use previously?

Thanks for pointing out an interesting product.

Tight groups,
Bob

[desmobob]

Hi Bob,

As stated above, this is IWB holster. The clip doesn't touch your body and have had it long enough to fall in love with it and share it with the masses before they likely raise the prices due to popularity! Shipping was Free and arrived fast USPS.

Have used quite a few and spent way more $$$ than I probably should have but if holster does not fit and function right i'm on to the next. As far as brand names go, I know a lot of these companies are small operations and I don't want to speak bad about any of them and realize I did on one in original post and have since edited it. I've found out the hard way, what holster works great for one person doesn't always do so for another.

Oh... <big head-slap> what was I thinking! The clip is obviously on the outside of the holster! Oops! I think the clip is a really cool idea and I may pick one up. The price is sure easy to deal with.

Thanks again for pointing out an interesting new product.

Have a safe, healthy and happy new year,
Bob

[PBJ]

Thanks Bob my pleasure and the same right backatcha!


Oh... <big head-slap> what was I thinking! The clip is obviously on the outside of the holster! Oops! I think the clip is a really cool idea and I may pick one up. The price is sure easy to deal with.

Thanks again for pointing out an interesting new product.

Have a safe, healthy and happy new year,
Bob

[SaltyNC]

Has anyone tried one with a CW380/P380 with Crimson Trace laser?

Salty

[PBJ]

Haven't personally tried but lasers are tiny and really shouldn't make any difference and at 16.99 shipped it's not much to invest imho. I'm ordering another one today for my PM45 and a few magazine pouches.

Looks like they have them for lasers HERE (http://www.ebay.com/dsc/m.html?_ssn=outbags&_armrs=1&_from=R40&_sacat=0&LH_TitleDesc=1&_nkw=ulticlip+laser+p380&_trksid=p2046732.m570.l1313.TR0.TRC0.H0.Xulticlip+ laser+p380.TRS1&_odkw=ulticlip+laser&_osacat=0) but you need to be logged in for link to work.


Has anyone tried one with a CW380/P380 with Crimson Trace laser?

Salty

[yqtszhj]

I had been looking at outbag holsters recently and just now saw your review. How thick is the material (nylon w/ lining) on each side? I saw one description that said 1/8 inch thickness and figured that was one side. If thats both sides combined thats super thin.

They make some good looking OWB leather holsters too.

[PBJ]

The nice thing is they are very thin but seem to hold there shape quite well and have a padded interior that protects the finish on firearm.

Here's a pic for you: http://imgur.com/a/zXdKM http://imgur.com/a/zXdKM

*For those more forum savy, why do my images not show in post?


I had been looking at outbag holsters recently and just now saw your review. How thick is the material (nylon w/ lining) on each side? I saw one description that said 1/8 inch thickness and figured that was one side. If thats both sides combined thats super thin.

They make some good looking OWB leather holsters too.

[Bawanna]

http://i.imgur.com/0mdOYOB.jpg

Testing her. I'm not familiar with imgur so I'm not sure.

Test failed miserably too.

[yqtszhj]

That is thin....

[PBJ]

Thanks Bawanna, what image hosting do most use so I'll know in the future?


http://i.imgur.com/0mdOYOB.jpg

Testing her. I'm not familiar with imgur so I'm not sure.

Test failed miserably too.

[SaltyNC]

Thanks for the link, PBJ!

Salty

[Baklash]

I like the looks of that clip. Never wore a holster clipped directly onto pants. Would it cause more sag than if clipped to a belt?

[Bawanna]

Depends on the pants of course but any belt even a cheap one would sag less than pants alone.

Some of them Carhart pants made out of heavy canvas might hold up pretty good. Course canvas with a good belt would be better yet.

[CharlieR]

Thanks for the tip, and the great pictures. I saw that on eBay, and I think I'll get one for my new CW380.

Charlie

[PBJ]

Ordered one for the pm45 and was unhappy with the fit.

Another small and quality holster to look into and that could be easily modified to use the UltiClip is made be Elite

https://s29.postimg.org/djs6i12kj/IMG_1727.jpg (https://postimg.org/image/djs6i12kj/)


https://s29.postimg.org/sh0nj1fsz/IMG_1728.jpg (https://postimg.org/image/sh0nj1fsz/)


https://s29.postimg.org/l2bbqntxf/IMG_1729.jpg (https://postimg.org/image/l2bbqntxf/)


https://s29.postimg.org/5uvc6b22r/IMG_1730.jpg (https://postimg.org/image/5uvc6b22r/)




photo hosting sites (https://postimage.org/)

[gb6491]

Thanks Bawanna, what image hosting do most use so I'll know in the future?
Don't know about most, but I use tinypic.com. If you don't join, you'll have to answer a captcha before you upload, then one every two uploads. Still, I like that it affords some anonymity.
If you join, I believe you become a member of photobucket.com; many folks use that as their host anyway.
Regards,
Greg

[PBJ]

Much thanks Greg

[Baklash]

Figured "at this price, why not", so ordered one for my cm9. I normally pocket carry the cm9, but have been looking for an iwb. Tried several different styles without success. This little holster is just the ticket. I can comfortably carry it on weak side for a cross draw.

[1stnamebassist]

I need to find an IWB for my new CT380. Any idea which model of this holster would work best? They don't list it for the CT380.

[PBJ]

Have you tried emailing the seller on ebay?

[1stnamebassist]

I did and they responded very quickly. I would have to send the dimensions and they would see what would fit best. I did find out my Versacarry that I had purchased for my Shield fits it fine, so I will try that for now.

[PBJ]

I did and they responded very quickly. I would have to send the dimensions and they would see what would fit best. I did find out my Versacarry that I had purchased for my Shield fits it fine, so I will try that for now.

Dimensions - http://www.gunblast.com/Kahr-CT380.htm

[CCHGN]

I just make my own with ABS and Kydex..

[b4uqzme]

^^^ I’m gonna have to start making my own holsters. I’m on my sixth week waiting for a holster that was promised in 3.

[gb6491]

^^^ I’m gonna have to start making my own holsters. I’m on my sixth week waiting for a holster that was promised in 3.
Not knowing your experience level sir:
https://www.youtube.com/results?search_query=make+kydex+holster
https://www.youtube.com/results?search_query=make+leather+holster
https://www.holstersmith.com/vcom/index.php
:)
Regards,
Greg

[CCHGN]

^^^ I’m gonna have to start making my own holsters. I’m on my sixth week waiting for a holster that was promised in 3.


I'm a much happier man since I stated making my own. I've tried Comp Tech and various others but don't like how the clips are on either side of the holster and all that leather backing, etc.. I like a single clip, right in front of the holster. I carry IWB appendix, so that works for me. Plus , if I have a lite or laser, etc I can make 'em to accommodate them. I make my own mag holsters and flashlight and mace, etc. I shoot 3 gun , so I made some quick access shot shell holders.