View Full Version : Problem with P9 Slide
I can't believe I put the slide in wrong after all of these years.The slide is to far back and the retaining pin has been installed,I don't know what to do?Do I force the pin out or ? I really don't have the money to take it in to a Gun Smith:(
gb6491
02-23-2017, 12:16 PM
Do you have the stop in front of the barrel lug?
marshal kane
02-23-2017, 01:09 PM
You need to be able to line up the slide stop lug with it's corresponding notch cut in the slide in order to drive the stop out. If you can do this, I'd say hold the slide in the proper position and have someone try tapping out the slide stop with a punch. Can you provide more information as to where the slide is with relationship with the frame and is the slide stop installed? A picture would help.
Do you have the stop in front of the barrel lug? I think it is,the slide is about 1/4" behind the mark on the frame.
Bawanna
02-23-2017, 01:40 PM
I had one brought to me not long ago with this same issue.
At Gregs suggestion I stuck a screwdriver up the mag well and gently pried the slide enough to move.
I took the back of the slide apart trying to get it loose which accomplished nothing.
It gets kind of wedged and the screwdriver broke it loose enough I could get the pin out. Then I had to pry just a bit before it popped loose to where I could get it all off and start over.
Thank you so much,I tried what you suggested and I finally got it out:)
Bawanna
02-23-2017, 02:53 PM
All credit to Greg, the man's a legend when it comes to figuring stuff out.
marshal kane
02-23-2017, 04:09 PM
Love to read a story with a happy ending. Good job, Bwanna!
gb6491
02-23-2017, 07:56 PM
Love to read a story with a happy ending. Good job, Bwanna!
Yep, well done Colonel!!:yo:
L.J, Welcome to the forums :)
....and Bawanna....that's a legend in my own mind (as my better half is apt to remind me:crazy:)
Regards,
Greg
Bawanna
02-23-2017, 08:11 PM
You, you, you mean there's two of us that are legends in our own minds?
Seriously after I got that officers gun apart after your screwdriver up the mag well, I was a honest to goodness hero around here.
Heck it must have lasted almost an hour too.
Alfonse
02-23-2017, 10:26 PM
Greg and Bawanna are just heroes as their natural state.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.