Magguts for CM9 series?

[bbjwho]

Did the Magguts company ever produce a +1 spring & follower for the PM9/CM9 series?
The +1 really puts my CW380 into a league of its own compared to the 380 competition. I was hoping they made one or used to make one for the 9mm series? I noticed the Glock 43 and other slim 9s are being offered.

Sent from my SM-G935T using Tapatalk

[zredwire]

I sent an email to Magguts asking this very question on 5/25/2016. Their response was "We definitely plan to make a conversion for the Kahr 9’s once we clear a few other projects." No timeline was given. I can't find the email but I also asked them basically the same question back in 2015 and got basically the same answer then. I encourage anyone who is interested to go here (http://magguts.com/about-us) and click on the form to request they make a conversion for the Kahr 9mm pistols.

[TwinTurbo]

[QUOTE=bbjwho;384128]Did the Magguts company ever produce a +1 spring & follower for the PM9/CM9 series?
The +1 really puts my CW380 into a league of its own compared to the 380 competition. I was hoping they made one or used to make one for the 9mm series? I noticed the Glock 43 and other slim 9s are being offered.

Lakeline LLC makes a plus one extension. Not sure if that would suit your needs?

https://lakelinellc.com/shop/1-magazine-base-kahr-9mm/

[Sidecar]

I just sent my email to Magguts, hope they come up with it soon!!

[LeeTn]

The Lakeline product actually makes the mag longer; the Mag-guts does not.

Sent from my Nexus 7 using Tapatalk

[LeeTn]

Forgot to mention: Mag-guts has a combination product that adds two (!) rounds to the 9mm Shield mag.

Sent from my Nexus 7 using Tapatalk

[bugs]

it sounds like bbjwho is looking for a +1 MAG SPRING and follower; wolff makes a % (?) stronger mag spring then stock for Kahrs; mostly I've used the stock follower whenever I gone to stronger mag springs.

NRA LIFER

IDPA BELEIVER

[robistro]

I sent an email to Magguts asking this very question on 5/25/2016. Their response was "We definitely plan to make a conversion for the Kahr 9’s once we clear a few other projects." No timeline was given. I can't find the email but I also asked them basically the same question back in 2015 and got basically the same answer then. I encourage anyone who is interested to go here (http://magguts.com/about-us) and click on the form to request they make a conversion for the Kahr 9mm pistols.

request sent. Kahr magazines seem to be scarce or not even carried by most stores. I would think this would be profitable for MagGuts to manufacture for the 9mm 6 round magazine.

[robistro]

I just got a reply from Magguts:

While we are planning on offering a conversion for the Kahr 9mm applications, it will likely be a while. We will add you to a list of interested customers to be contacted when they are available.

Thanks for the input.


MagGuts Support

[1stnamebassist]

Forgot to mention: Mag-guts has a combination product that adds two (!) rounds to the 9mm Shield mag.

Sent from my Nexus 7 using Tapatalk
I just installed 2 sets in two of the Shield 7 round magazines and they run like a champ! They add a little bit of length to the magazine but it's still 1/4" shorter than the stock 8 rounder! I suggest a magazine loader otherwise that last round is a bear to put in by hand! Also did 2 magazines for my new ct380 and they work like a charm! So my Shield holds 10 rounds and my ct380 holds 9 total!

[jocko]

a mag loader is nice but I learned quick that they can be ahassle tdo fokk with, so I just load my mags two rounds short for range use. No big deal to load one time for carry with defense ammo. I normally have two or three mags, so I just leaave the carry mag loaded with defense ammo. also cuts down on wasting of ammo do for range use. Just sayin

[jocko]

if anyone here has a G43, definitely buy the Tran tactical 1 round extension. believe it or not, there might be a quarter inch more grip and that is all. A well made machined extension..Just sayin

[dsk]

I have MagGuts kits in both a P380 and a Glock 42. Admittedly they are very expensive for what they are, but they definitely work as advertised. In my P380 they actually improved feed reliability and allow me to slingshot the slide, something I couldn't do when using the factory mag followers.

[Cymerej]

I just filled out the request form. This would be awesome.

[SmokyT]

I submitted my request a Couple of years ago, and am still waiting for it. In the meantime, I am switching my go-to CCW to Glock 43 with Magguts, which has been working flawlessly.

[TheLastDaze]

I just installed 2 sets in two of the Shield 7 round magazines and they run like a champ! They add a little bit of length to the magazine but it's still 1/4" shorter than the stock 8 rounder! I suggest a magazine loader otherwise that last round is a bear to put in by hand! Also did 2 magazines for my new ct380 and they work like a charm! So my Shield holds 10 rounds and my ct380 holds 9 total! and the shield is still heavier than the G26 and holds less rounds.. not a fan of the shield for sure


a mag loader is nice but I learned quick that they can be ahassle tdo fokk with, so I just load my mags two rounds short for range use. No big deal to load one time for carry with defense ammo. I normally have two or three mags, so I just leaave the carry mag loaded with defense ammo. also cuts down on wasting of ammo do for range use. Just sayin
yes sir, bought the TTI plus one when they first came out, absolutley love it with the 43... hmmm, wonder if maguts plus the TTI extension would work together?? making it 9 rounds and still lighter and smaller than a shield😁

[Badbot]

I changed the follower and spring for my CM45. in post, http://www.kahrtalk.com/showthread.php?14747-Chambering-the-first-round-a-slingshot-modification/page17
I have no idea if it would work on all the Kahrs.
I also need to live fire all of them. the ones in the other post at $19 for both pieces. you can find lower prices on Ebay.

I had some in my old comp. mags. so I did not have to buy anything.