New tool

[King Rat]

Well, My cw380 has been running like a top. I mean perfect with over a thousand rounds with no problems. But, as much as I did not want to invest in a New Striker from Lakeland, I went ahead and bought one. I am hoping the old adage of "if it ain't broke, do not fix it" does not come back to haunt me. I have not tried the new striker out yet.

That said, I do not know if any of you can replace the striker spring and end cap as easy as the guy on the instructional video. For me, and I admit to being all thumbs, it is a PITA. Always end up with the spring and guide rod flying. So I looked around and found this, a Wall anchor that I use for 22.cal snap caps. It worked perfectly. Fast and easy. Pushing down and holding it was easy. I pushed down with the Flat end of the cap going down on the striker guide. When it was far enough down, the backplate pushed easily OVER the Rim of the anchor and then very easy to pull out when secure. The cap itself made it easy to have a firm grip.
Hope it works for you. Just a DIY bit of info.


https://i.imgur.com/lruntgT.jpg?1

[ripley16]

The quickest, easiest and simplest way I've found to take the upper apart is using the Ripley Retractor.
https://i.postimg.cc/gj3RzWgq/Kahrtool002.jpg (https://postimages.org/)

Jewelers screwdriver to make the space between the guide rod and the back plate, insert the retractor to capture the guide rod, striker and spring, the fit the other end over the breech face. Done. Takes 20 seconds. Holds every thing in place while the plate is removed.
https://i.postimg.cc/664fbsfQ/Kahrtool001.jpg (https://postimages.org/)

Slowly free the breech face side and let the spring expand slowly. Do the reverse to reassemble.

Made from a coat hanger.

[boscobarbell]

And what do you use to release the back plate? I tried like heck to get mine to move, and it just hung up. Poking around in that little hole to get the tension off the plate never seemed to do much of anything...maybe I was using the wrong implement for that?

I wouldn't go through the process often (my Lakeline striker is already in place), but I suppose it's a good idea to open her up and blow out whatever gunk accumulates in there? Plus, Galloway sells a SS striker guide that seems like a decent upgrade.

[boscobarbell]

Well, My cw380 has been running like a top. I mean perfect with over a thousand rounds with no problems.

Wow!! Glad you've really taken to your little Kahr!! You have clearly surpassed me in terms of rounds (I'm probably pushing 350-400 at this point), but like you I am very much taken by my little Kahr. Mine is a bit ammo-picky, which I don't love...but it seems to like both Hornady Critical Defense and the Hornady/Underwood XTP rounds, so I have some excellent SD ammo from which to choose.

[Bawanna]

And what do you use to release the back plate? I tried like heck to get mine to move, and it just hung up. Poking around in that little hole to get the tension off the plate never seemed to do much of anything...maybe I was using the wrong implement for that?

I wouldn't go through the process often (my Lakeline striker is already in place), but I suppose it's a good idea to open her up and blow out whatever gunk accumulates in there? Plus, Galloway sells a SS striker guide that seems like a decent upgrade.

The little hole in the back plate is deceiving. It's only about half as big as it appears. Takes a very small jewelers screwdriver or a very small pin punch. The actual hole is kind of half mooned. If you don't hit it you accomplish nothing. Sometimes if the plate hasn't been off a little gentle prying is in order the first time or two.

[boscobarbell]

The little hole in the back plate is deceiving. It's only about half as big as it appears. Takes a very small jewelers screwdriver or a very small pin punch. The actual hole is kind of half mooned. If you don't hit it you accomplish nothing. Sometimes if the plate hasn't been off a little gentle prying is in order the first time or two.

Oh, that's very helpful. Much appreciated!!

[wally1]

Short of growing a third hand, the retractor is the way to go!

[DavidR]

The little hole in the back plate is deceiving. It's only about half as big as it appears. Takes a very small jewelers screwdriver or a very small pin punch. The actual hole is kind of half mooned. If you don't hit it you accomplish nothing. Sometimes if the plate hasn't been off a little gentle prying is in order the first time or two.

This nails it. You just need the right size tool.

[King Rat]

Wow!! Glad you've really taken to your little Kahr!! You have clearly surpassed me in terms of rounds (I'm probably pushing 350-400 at this point), but like you I am very much taken by my little Kahr. Mine is a bit ammo-picky, which I don't love...but it seems to like both Hornady Critical Defense and the Hornady/Underwood XTP rounds, so I have some excellent SD ammo from which to choose.

Yes, have really enjoyed the CW380, and also have shot the CM with more rounds and again running awesome. Love that gun. I shoot the 380 primary with PrecisionOne ammo. On another note, my Nano should be at the 10,000 rd mark by the end of the month. One of the most reliable guns I have owned. That said, I carry the CM now because of the lighter weight. (When I am not carrying the 380) Beretta has the New APX carry out now, which is just a upgraded Nano. Looks nice, but nothing that makes me want to buy one over the Nano. I have become so use to shooting the Nano, that I would not spend another $400 for a newer model. If anything, I would get another Nano as a Backup. I saw one the other day for around $250. It is built about as rock solid as any Micro 9mm I have run across, and I have shot most of them. I was surprised to see how well the Little CM handled. And of course I love the DAO triggers. Wish the Nano did not have the Glock style Dingus on the trigger. Kahr really got that one right.
Ps, that little Keltec P32 is still running well.

How are things working out with your guns. Still shooting the RM? I may have mentioned a group of us at my club will pitch in and test different firearms for comparison. We did the Sig 365 a few months ago and most recently the 43X and Mossberg MC1, Sig 320. Have to say the Mossberg was a real surprise. Shot great.

[boscobarbell]

Yes, have really enjoyed the CW380, and also have shot the CM with more rounds and again running awesome. Love that gun. I shoot the 380 primary with PrecisionOne ammo. On another note, my Nano should be at the 10,000 rd mark by the end of the month. One of the most reliable guns I have owned. That said, I carry the CM now because of the lighter weight. (When I am not carrying the 380) Beretta has the New APX carry out now, which is just a upgraded Nano. Looks nice, but nothing that makes me want to buy one over the Nano. I have become so use to shooting the Nano, that I would not spend another $400 for a newer model. If anything, I would get another Nano as a Backup. I saw one the other day for around $250. It is built about as rock solid as any Micro 9mm I have run across, and I have shot most of them. I was surprised to see how well the Little CM handled. And of course I love the DAO triggers. Wish the Nano did not have the Glock style Dingus on the trigger. Kahr really got that one right.
Ps, that little Keltec P32 is still running well.

How are things working out with your guns. Still shooting the RM? I may have mentioned a group of us at my club will pitch in and test different firearms for comparison. We did the Sig 365 a few months ago and most recently the 43X and Mossberg MC1, Sig 320. Have to say the Mossberg was a real surprise. Shot great.

Wow, that's great. If I were ever in the market for another 9mm, I would definitely look at the Nano/ARX. I did just buy a KT PF9, but that is really just to see if I can find a a 9mm to replace my .380s as EDC. I don't dislike the .380 round, but definitely prefer a 9mm. I expect the PF9 to not be very much fun at the range, so if I keep it I will likely just shoot it enough to make sure it works and then carry it. My P380 certainly isn't going anywhere...it and the Seecamp really fit the bill when I want to carry and absolutely nothing else is small enough for that given day/wardrobe.

Terrible news with my RM380...I have a cracked slide, and Remington is refusing to warranty it (they say I voided the warranty when I had the slide refinished....talk about horrible CS! That company really deserves to fold, given all the bad things I've heard about them over the last 10 years). I am attempting to find a used slide so I can keep the pistol running...it really is a great little gun that will shoot whatever you put in it. But I do have lingering doubts about its durability now, although based on internet reports it sounds like my case is really the exception.

I had sold my Glock 42, but as luck would have it (long story) the buyer could never take delivery, so I bought it back. It is a little bigger, obviously, but still only 13 oz. And it really does shoot like a .22. I sold my Pico to fund my P365, and regretted doing so ever since. I'm sure I'll get another one some day, but I've come to like and carry my P380 so much that I don't really NEED one.

[King Rat]

Well, My cw380 has been running like a top. I mean perfect with over a thousand rounds with no problems. But, as much as I did not want to invest in a New Striker from Lakeland, I went ahead and bought one. I am hoping the old adage of "if it ain't broke, do not fix it" does not come back to haunt me. I have not tried the new striker out yet.

That said, I do not know if any of you can replace the striker spring and end cap as easy as the guy on the instructional video. For me, and I admit to being all thumbs, it is a PITA. Always end up with the spring and guide rod flying. So I looked around and found this, a Wall anchor that I use for 22.cal snap caps. It worked perfectly. Fast and easy. Pushing down and holding it was easy. I pushed down with the Flat end of the cap going down on the striker guide. When it was far enough down, the backplate pushed easily OVER the Rim of the anchor and then very easy to pull out when secure. The cap itself made it easy to have a firm grip.
Hope it works for you. Just a DIY bit of info.


https://i.imgur.com/lruntgT.jpg?1

Update, well I replaced the working OEM striker with the New Lakeland, and thank goodness it worked fine. I also replaced the extractor and different springs. What Did Happen is my Front Sight popped off. Thankfully I was at a indoor range and was able to find it. Also I shot the Mossberg again and still impressed. I was with a range friend that had one. The LGS told me they are sold out and have been waiting for a while now to get them in.

[gb6491]

Update, well I replaced the working OEM striker with the New Lakeland, and thank goodness it worked fine. I also replaced the extractor and different springs. What Did Happen is my Front Sight popped off. Thankfully I was at a indoor range and was able to find it. Also I shot the Mossberg again and still impressed. I was with a range friend that had one. The LGS told me they are sold out and have been waiting for a while now to get them in.
If that was the polymer, factory front sight, you are probably better off replacing it than trying to reuse it. That sight is installed by melting the ends of the two posts in a way that they form heads. You could go that route (polymer) again, but I feel you would be better served with a metal sight like the night sights Kahr sells or the fiber optic front sight from Dawson Precision.
Regards,
Greg

[King Rat]

If that was the polymer, factory front sight, you are probably better off replacing it than trying to reuse it. That sight is installed by melting the ends of the two posts in a way that they form heads. You could go that route (polymer) again, but I feel you would be better served with a metal sight like the night sights Kahr sells or the fiber optic front sight from Dawson Precision.
Regards,
Greg

Actually it was the Trijicon night sight that fell off. Does anyone know the size screw it takes? Best directions to find the answer? Also, I do have Dawson on my Nano. What size are many of you using for say 10" for the CW380?
Thanks

[gb6491]

Actually it was the Trijicon night sight that fell off. Does anyone know the size screw it takes? Best directions to find the answer? Also, I do have Dawson on my Nano. What size are many of you using for say 10" for the CW380?
Thanks
Did that Trijicon just fall off or did one of the posts shear off?

[King Rat]

Did that Trijicon just fall off or did one of the posts shear off?

It appears that the Screw came off. I used the thread locker that came with the sight. I am wondering what Kahr uses to seal up the stock sight. Must be some kind of Rubber compound resistant to heat. It might actually be a better way of sealing the sight on. And would not have to worry about it searing off as well.

[Ed M]

KR - the stock front sight is plastic. Kahr just melts the posts that stick out of the underside of the slide with something like a soldering iron.

Those sight screws are TINY. Probably best to just call Kahr and get one from them.

If you tell them what happened, maybe they'll send you one for nuthin'.

Check those posts on the sight - if they're not the same height, the post likely broke off. If so, Kahr should be able to help...