9mm variations

[340pd]

Found this image on another forum but I never knew there were so many variations of 9mm rounds.
http:// (http://<a href=&quot;https://postimg.cc/FdK2vRyd&quot; target=&quot;_blank&quot;>https://i.postimg.cc/d1Rv8ZDB/9mm.jpg</a>)https://i.postimg.cc/d1Rv8ZDB/9mm.jpg (https://postimg.cc/FdK2vRyd)

[I_Like_Turtles]

Where is the 9x21 and 9mm Super Comp?

I knew there were a lot of 9mm's out there, not this many of course, which is why I never just say "9mm" but what it really is, the "9mm Parabellum" of 1908 I think.

[yqtszhj]

Found this image on another forum but I never knew there were so many variations of 9mm rounds.
http:// (http://<a href=&quot;https://postimg.cc/FdK2vRyd&quot; target=&quot;_blank&quot;>https://i.postimg.cc/d1Rv8ZDB/9mm.jpg</a>)https://i.postimg.cc/d1Rv8ZDB/9mm.jpg (https://postimg.cc/FdK2vRyd)

That simplifies it. LOL!
Im gonna try that .357 automag in my CM9.

[dustnchips]

It won't feed because of the flat nose.

[mr surveyor]

It just ain't gonna work. Since I'm a surveyor and ciphering is what I have to do some times, that makes me gooder at rithmetic that most. I juggled the numbers to see, and .357 is only 1/25th of 9. With a bullet that small, it just ain't gonna fit the bore and obstrenate enuff to fit.

That knowledge came from re-loading my own carturiges.

Amazing what you can lern on the innernetsuperhighway


jd

[jeepster09]

It won't feed because of the flat nose.


That's what "files" are for.....

[yqtszhj]

That's what "files" are for.....

I figured if worse came to worse I could whittle it down with my pocket knife. Or maybe Dremel the chamber a little bit to open it up.

[jeepster09]

Exactly....or you could use this guy to modify it!

https://www.facebook.com/eatracedieproductions/videos/1123052517877097/

[Bawanna]

Maybe a pencil sharpener would get it done, take off that corner ya know?