BirdsThaWord
02-01-2024, 06:51 AM
Just in case someone wants to know…
My recent S9 purchase had me holster shopping. This one is intended for summer carry when the Shield Plus is a tad too thick and prints a tad too much (shorts & t shirt). The available holsters were of a dismal selection, too bulky and/or more than I would pay. So I went with what I’ve ran before, which is the minimalist Clip Draw. They are not listed as being for the S9, but rather for the CW9 and P9. I emailed Kahr, asking if the backplate of the S9 and CW9 had the same dimensions there and if they were interchangeable. Of course it took ages for them to respond, but finally they did and confirmed what I thought, which is “yes”. Being impatient, I went ahead and ordered one before Kahr’s answer and sure enough it did fit. Also, I forget the website, but one site shows an S9 laying over a CW9. You can slide a bar on the screen which slowly fades out the S9 to reveal the CW9. Same exact dimensions on most everything, but of course the dust cover/rails. I forget if the muzzle end of the slide was exactly the same or not. Anyway, looks like very little difference between the models. I did notice that the mag release on my S9 appears to be poly while my last Kahr (CW45) was steel that loved to rust in front of your eyes, so good improvement there. Unsure of that parts durability over time, with the mag catch and mag window interacting, but I don’t plan to put a gazillion rounds through it, so no concern there. Just happy I won’t have to be removing the catch constantly to oil it and clean rust from it and the frame due to sweating.
My recent S9 purchase had me holster shopping. This one is intended for summer carry when the Shield Plus is a tad too thick and prints a tad too much (shorts & t shirt). The available holsters were of a dismal selection, too bulky and/or more than I would pay. So I went with what I’ve ran before, which is the minimalist Clip Draw. They are not listed as being for the S9, but rather for the CW9 and P9. I emailed Kahr, asking if the backplate of the S9 and CW9 had the same dimensions there and if they were interchangeable. Of course it took ages for them to respond, but finally they did and confirmed what I thought, which is “yes”. Being impatient, I went ahead and ordered one before Kahr’s answer and sure enough it did fit. Also, I forget the website, but one site shows an S9 laying over a CW9. You can slide a bar on the screen which slowly fades out the S9 to reveal the CW9. Same exact dimensions on most everything, but of course the dust cover/rails. I forget if the muzzle end of the slide was exactly the same or not. Anyway, looks like very little difference between the models. I did notice that the mag release on my S9 appears to be poly while my last Kahr (CW45) was steel that loved to rust in front of your eyes, so good improvement there. Unsure of that parts durability over time, with the mag catch and mag window interacting, but I don’t plan to put a gazillion rounds through it, so no concern there. Just happy I won’t have to be removing the catch constantly to oil it and clean rust from it and the frame due to sweating.