Deacon
01-08-2011, 09:49 PM
Yes I did. But in my defense I was watching football and cleaning at the same time. Thought I was going to have to call Kahr but figured it out.:D
Here's what happens. The slide will go on then stop 1/2" from the rear of the frame. The slide has gotten stuck on the cocking cam. It wont go forward or back into battery (thank God). If you look at the rear of the frame/slide you will see the cam sticking up. Slide a very small 90 degree allen wrench in through the gap between the slide and frame. Position the perpendicular part of the allen wrench in front of the cam and slowly pull back, pushing the cam down. Slide your slide off when you depress the cam as far as you can. And DONT DO IT AGAIN. :yo:
Here's what happens. The slide will go on then stop 1/2" from the rear of the frame. The slide has gotten stuck on the cocking cam. It wont go forward or back into battery (thank God). If you look at the rear of the frame/slide you will see the cam sticking up. Slide a very small 90 degree allen wrench in through the gap between the slide and frame. Position the perpendicular part of the allen wrench in front of the cam and slowly pull back, pushing the cam down. Slide your slide off when you depress the cam as far as you can. And DONT DO IT AGAIN. :yo: