Front sight on PM9

[rwblue01]

How tight is the front sight on PM9s?

Mine doesn't want to move.

[eklipto101]

They are tight but if you have a vise put the slide (only) on it, I put wood on each side so that it wont mare the slide then with a flat screw driver (I put masking tape on the front) put on the dove-tail side and hit it firmly, pay attention to the screw drive not to slip, go from right to left if your looking from the rear, about four good solid hits and it will move.
Take your time and don't be in any hurry, make sure the screw driver is flat on the dove-tail that way it wont mare the sight. Good luck.