CW9 trigger rest

[Pines]

What would cause my trigger to fail to reset? Failed to reset several times yesterday. Thanks.

[jocko]

could be an out of spec trigger bar, u could also have a dirty/gummed striker channel. refer to the kahr luibe chart and loot at that little hole up by the front of the breech, insuet your cleaner spray nozzle in there and just spray away. U might want to refer also in the kahr tech section tho the thread called: Propper prepping of ur new kahr, there are some tims and things to look for.

be very sure the slide is fully returned. the slightest ouot of battery will cause a dead trigger.:blah:

[yqtszhj]

The only time mine has done that was once when it didn't go into full battery. it was about 1/8 inch out. the extractor did not go over the rim of the shell casing in the feed. Like jocko said something may be gummed up and need cleaning out. Hopefully it's that simple.

[Pines]

Yeah, I blew out the striker channel, lot of gunk came out. I think that should do it. never had that problem before. I will go shoot when the temp drops about 10 degrees. Hit 99 here today. Thanks!

[yqtszhj]

Yeah, I blew out the striker channel, lot of gunk came out. I think that should do it. never had that problem before. I will go shoot when the temp drops about 10 degrees. Hit 99 here today. Thanks!

Just get up really early. I will be worth it. that smell of powder in the AM. :D

[Pines]

Not a bad idea. The smell of powder along with the smell of coffee.
This weather needs to break real soon. Way too hot.