Mag Follower Sanding Tip

[hoghunter]

I had the mag nose dive issues and found something that really helped me find exactly where to sand the mag follower. When you load the mag and get to the spots (both of them) where the follower contacts the mag release in the mag latch window, I used a Sharpie Metallic Silver Pen to make the markings on the black mag follower through the latch window. Once you disassemble the mag, the silver ink shows up really good on the mag follower and help me zero in on where I needed to sand. I first tried scraping with a pin but that became difficult to locate once I started to sand. I know how frustrating the issue is so hopefully someone finds this tip useful.