low profile leather mag carrier

[JodyH]

Looking for a nice low profile black leather single mag carrier for Kahr 9mm magazines. Prefer a leather belt loop attachment for a 1.5" belt.
Any ideas?

[Bawanna]

On occasion I use an old horizontal cell phone case. It fits my PM45 so should be large enough for the PM9. I used to have a smallish like leatherman leather pouch that worked perfectly for a 9. Not sure if I still got that around or not.
I think I have a Galco single stack 9mm mag pouch, it has a plastic clip rather than a loop.

[JodyH]

I like to carry my magazine in the appendix area just left of my belt buckle, with my gun (K9) AIWB just to the right of my buckle. I'm looking for a low profile open top carrier since it's concealed anyway there's no need for deception.
I currently use a DeSantis pocket carrier, but would like a belt carry option to free up some pocket room.

[gb6491]

I like Galco's Quick Magazine Carrier.
http://i52.tinypic.com/ojfpu1.jpg
Regards,
Greg

[Bawanna]

That's the one I got right there, except mine is natural or tan colored. Real secure but comes off and goes on real easy.

[JodyH]

I like Galco's Quick Magazine Carrier.
http://i52.tinypic.com/ojfpu1.jpg
Regards,
Greg
Got a model # or part #?

[OldLincoln]

Google "Galco's Quick Magazine Carrier" (http://www.google.com/search?q=%22Galco%27s+Quick+Magazine+Carrier%22&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a).

[JodyH]

Google "Galco's Quick Magazine Carrier" (http://www.google.com/search?q=%22Galco%27s+Quick+Magazine+Carrier%22&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a).
Did that, even went to Galco's online catalog.
I can't find one for single stack 9mm magazines.
A Galco product code # would make narrowing it down to a specific model much easier.

[Bawanna]

Mine has a 3104 stamped in the leather on the back. I'm not positive its for a 9 but I think so. K40 fits snug and PM45 won't go so probably a 9.

[Bawanna]

http://www.usgalco.com/HolsterPT3.asp?ProductID=3636&CatalogID=450

Found em. Gosh darn, I must have been rich or something when I ordered mine or they use to be cheap. 48 bucks, ouch.

[JFootin]

http://www.usgalco.com/HolsterPT3.asp?ProductID=3636&CatalogID=450

Found em. Gosh darn, I must have been rich or something when I ordered mine or they use to be cheap. 48 bucks, ouch.

You can get them at OpticsPlanet.com for about $31 with free shipping.

[jlaudio29]

Ill make you one with a leather belt slot in the back instead of plastic for $25 shipped :)

[JodyH]

Ill make you one with a leather belt slot in the back instead of plastic for $25 shipped :)
I'll take two in black.
PM me and we can make arrangements.

[gb6491]

Did that, even went to Galco's online catalog.
I can't find one for single stack 9mm magazines.
A Galco product code # would make narrowing it down to a specific model much easier.
Sorry about that, I am using one for the P45, P/N: QMC26B. I bought it new and it was pretty tight for my .45 mags, but a good snug fit for the 9mm Kahr mags. I just decided to use it for them vice the 45 mags.

I think that's a pretty good deal that jlaudio29 has offered up:)

Regards,
Greg

[JFootin]

Ill make you one with a leather belt slot in the back instead of plastic for $25 shipped :)


I think that's a pretty good deal that jlaudio29 has offered up:)

Regards,
Greg

+1 on that. Can't beat it for a nice leather mag holder.

[OldLincoln]

Always wondered, with so much mag sticking up over the belt, is comfort an issue.

[steve666]

Ross mag carriers are sized for the following calibers:

.22/.32 Single Stack Mags
.380 Single Stack Mags
9mm/40 Single Stack
.45 Single Stack Mags
9mm/40/357 Double Stack Mags
10mm/45 Double Stack Mags
http://www.ccwsupply.biz/RossM51PAGE.htm

http://www.ccwsupply.biz/RossM51PagePHOTO1.jpg http://www.ccwsupply.biz/RossM51PagePHOTO2.jpg $37.50

[gb6491]

Always wondered, with so much mag sticking up over the belt, is comfort an issue.
No, I haven't found it to be an issue and I suffer from "Dunlap disease" (my belly has done lapped over my belt):o
Regards,
Greg

[JFootin]

Ross mag carriers are sized for the following calibers:

.22/.32 Single Stack Mags
.380 Single Stack Mags
9mm/40 Single Stack
.45 Single Stack Mags
9mm/40/357 Double Stack Mags
10mm/45 Double Stack Mags
http://www.ccwsupply.biz/RossM51PAGE.htm

http://www.ccwsupply.biz/RossM51PagePHOTO1.jpg http://www.ccwsupply.biz/RossM51PagePHOTO2.jpg $37.50

ALERT! ALERT! I wouldn't go anywhere near ccwsupply.biz for anything except look at the nicely displayed products. They have a BBB rating of 'F', they don't respond to emails, they don't answer the phone and the voice mail box is full, so you cannot leave your number. If you call to Ross Leather and inquire about their products, they will give you a discount to encourage you to make a buying decision. It won't be as low as ccwsupply.biz, but you can't count on anything being true on that website. They say just about all of the Ross holsters are lined, but they don't tell you that it will cost you $15 extra for that option. And would I give them a credit card number or authorize a PayPal payment to them? Not even if hell freezes over! I didn't just fall off the turnip truck.

[Ressom]

I found these Gould & Goodrich that may fit the bill...
Paddle style:
http://www.midwayusa.com/viewProduct/default.aspx?productNumber=845140

Belt style:
http://www.midwayusa.com/viewProduct/?productNumber=561434

Has anyone tried either of these?

[JFootin]

Here are some mag holders and a gun belt at good prices:
http://kdholsters.com/accessories.php