IWB wanted for PM9

[peterj]

I would like to buy a RH IWB for my PM9 that fits the following criteria:

1. Thin (profile and construction), preferably leather but would consider kydex
2. Tuckable
3. Single Clip/offset? see #1
4. Reinforced mouth
5. Stable
6. Cantable or canted

I have ordered a custom one but the lead time is rather long. I have a MTAC for one of my other guns so I'm familiar with those type of holsters.

I would like to hear any suggestions you may have that fit the bill.
Thanks

[wagon]

Crossbreed Micro-Clip. KahrShop sells them, should be in stock. Good luck.

[Raoul]

Here's a link to my favorite. (http://www.concealco.com/)

And a pic.

http://naws.com/AKJ.jpg

[mx5fan]

Take a look at this thread on the Tucker Silent Thunder. It's kydex on the outside, leather on the inside. I have 2 of them (one iwb and one owb)...I highly recommend, but like all holsters, it's a matter of opinion.

http://kahrtalk.com/holsters-gear/931-tucker-gunleather-iwb-mk9.html

Link to Tucker Gun Leather:

"Silent Thunder" IWB's - <b>$85</b> (http://rlcompanyusa.stores.yahoo.net/sithiw.html)

[polkhigh]

Check out Pure Kustom Holsters (www.purekustomholsters.com (http://www.purekustomholsters.com)). I got the Black Ops Pro for my PM9 and it rocks. I've had it for about a week and a half and have been carrying everyday. I have it at the 4 - 5 oclock position and its the most comfortable holster that I've worn. The best part is it is adjustable, tuckable and can be worn IWB AND OWB!

Take a look at my brief review on defensecarry.com (Pure Kustom for Kahr PM9 - DefensiveCarry Concealed Carry Forum (http://www.defensivecarry.com/vbulletin/defensive-carry-holsters-carry-options/96534-pure-kustom-kahr-pm9.html))

[Dogman]

FIST, Inc. (http://www.fist-inc.com)

[burns]

I second the FIST rec, since you like thin holsters in Kydex.

However, if it were me, I would look at JS Holsters IWB. The clip is made from the same piece of kydex as the rest of the holster, which cuts down on thickness. Tell them you need it fast if/when you order.

[peterj]

Thanks to all for the input. I have ordered a Silent Thunder and a custom from HBE. Silent Thunder should be here in a couple of weeks and the custom in a couple of months.

[LLDJR]

DM Bullard

Results for Tuckable IWB w/ Metal Belt Clip A-M (http://estore.websitepros.com/1565531/Categories.bok?category=Tuckable+IWB+w/+Metal+Belt+Clip+A-M)

http://estore.websitepros.com/stores/1565531/images/1911%203%20.5033.JPG

[burns]

I got a Grandfather Oak kydex with both a snap clip and their version of a J-hook (brass knob). It is insanely thin and comfortable.

[Wasabi]

Another vote for a FIST, specifically a K4A. Get it with a velcro clip and it will disappear.

[TxKahr]

I went with the Comp-Tac MTAC for its fit and finish. I like that it is adjustable, tuckable and it holds my gun very tightly.

http://kahrtalk.com/members/txkahr-albums-pm9-picture175-mtac-shortened.jpg

[jeepster09]

I would like to buy a RH IWB for my PM9 that fits the following criteria:

1. Thin (profile and construction), preferably leather but would consider kydex
2. Tuckable
3. Single Clip/offset? see #1
4. Reinforced mouth
5. Stable
6. Cantable or canted

I have ordered a custom one but the lead time is rather long. I have a MTAC for one of my other guns so I'm familiar with those type of holsters.

I would like to hear any suggestions you may have that fit the bill.
Thanks

Did you find one?

[jlottmc]

Well, I have an el cheapo from Cheaper Than Dirt of course, it fits most of the criteria well, and runs a whopping 10 bucks... ZAA-826 - Ace Case Tuckable Holster, .380 Autos Fits .380, PPK, Llama 380, Sig 230, 232, Right Hand (http://www.cheaperthandirt.com/ZAA826-33.html) It works for my Bersa CC 380 and my P45. As for a rehloster after a draw, I don't worry about it, the best parts are 1 complete comfort (it weighs nothing, is very thin) 2 complete concealment (thin material, spring clip is very strong, and the tuck flap is very deep) 3 it's a whopping 10 bucks.

[Make It In Mass]

The Blade-Tech Ultimate Concealment Holster meets most of your criteria. I have one for my PM9, and I can tuck my shirt in between the off-set clip (reduces thickness where the belt crosses over the holster). The whole package is thin enough to disappear under a tucked shirt, with only the single non-descript clip on the belt. Great retention (adjustable) and smooth enough to wear against bare skin with comfort. I was cutting wood with it on and I forgot it was there. ;)

Blade-Tech Ultimate Concealment Holster :: IWB holsters :: Blade-Tech Industries (http://www.blade-tech.com/Blade-Tech-Ultimate-Concealment-Holster-pr-821.html)

[rnpollard]

Money back upon return (-shipping) if you aren't satisfied.

Take a look: http://kahrtalk.com/holsters-gear/2176-updated-leather-kydex-hybrid-holsters-all-kahrs-others.html